Yamaha RX-SL80 owner manual Lfe/Bass Out, 02ASUBWOOFER Phase, Cross over Cross Over

Bass out LFE/BASS OUT

Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and right speakers according to the characteristics of your system. This setting also determines the routing of the LFE (low- frequency effect) signals found in Dolby Digital or DTS sources.

Choices: SWFR, FRNT, BOTH

LFE/BASS OUT

)BOTH

•Select SWFR if you connect a subwoofer. LFE and low-frequency signals from other channels are directed to the subwoofer according to the speaker settings.

•Select FRNT if you do not use a subwoofer. LFE and low frequency signals from other channels are directed to the front speakers according to the speaker settings (even if you have previously set front speakers to SML).

•Select BOTH if you connect a subwoofer and you want to output low-frequency signals from front channels to both the front speakers and subwoofer. LFE and low- frequency signals from other channels are also directed to the subwoofer according to the speaker settings. Use this function to reinforce low-frequency signals using the subwoofer when playing back sources such as CDs.

Cross over CROSS OVER

Use this feature to select a cross-over (cut-off) frequency for all low-frequency signals. All frequencies below the selected frequency will be sent to the subwoofer. Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

CROSS OVER

;;;80Hz

SET MENU

Subwoofer phase SUBWOOFER PHASE

If bass sounds are lacking or unclear, use this feature to switch the phase of your subwoofer.

Choices: NORMAL, REVERSE

02ASUBWOOFER PHASE

)NORMAL

•Select NORMAL if you do not want to reverse the phase of your subwoofer.

•Select REVERSE to reverse the phase of your subwoofer.

■Speaker level B)SPEAKER LEVEL

Use these settings to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in SPEAKER SET (page 40).

Choices: –10 to +10 dB

B)SPEAKER LEVEL

.

•FR adjusts the balance of the front left and front right speakers.

•C adjusts the balance of the front left and center speakers.

•SL adjusts the balance of the front left and surround left speakers.

•SR adjusts the balance of the surround left and surround right speakers.

•SWFR adjusts the balance of the front left speaker and subwoofer.

y

To calibrate, use the test tone feature (see page 37).

OPERATION ADVANCED

English

41