Yamaha RX-V1065 owner manual Audio player, About audio/video output terminals

¶,lllll_"l(qll _

•Audio player

Output jacks		on	the connected		external	component				In mt sources/jacks of this unit
	External	component				Output	jack	Input	source		Input jack
External	component	v,,ith optical		digital	Optical	digital	output	AV 1 (TV)		OPTICAL
output								AV4		OPTICAL
External	component	with	coaxM	digital	Coaxial	digital	output	AV2		COAXIAL
output								AV 3 (CD)		COAXIAL
External	component	with	analog	audio	Analog	audio	output	AV5		Analog	audio
output								AV6		Analog	audio
								AUDIO	1	Analog	audio
								AUDIO	2	Analog	audio
Turntable					Analog	audio	output	PHONO		Analog	audio

"4'--

•We recommend connecting the coaxial digital output terminal of a CD player to the AV3 jack.

•When connecting a turntable with a low-output MC cartridge to the PHONO ,jacks. use an inqine boosting transformer or MCq_ead amplifier.

•Connect your turntable to the GND terminal of this unit to reduce noise in the signal.

About audio/video output terminals

Among the analog audio and analog video signals input to this unit via input terminals, the audio/video signals of the selected input sources are output from the AV OUT jacks and AUDIO OUT jacks. An HDMI input signal, COMPONENT VIDEO input signal or digital audio input signal cannot be output.

When using the AV OUT jacks: connect an external component to the VIDEO or analog audio terminal.

When using the AUDIO OUT jacks: connect an external component to the analog audio terminal.

•Connecting a multi-format player or an external decoder

This unit is equipped with 8 additional input jacks (Front L/R, Center, Surround L/R, Surround Back L/R and Subwoofer) for analog multi-channel input from a multi- format player, external decoder, etc.

•When you select "MULTI CH" as the input source, the digital sound field processor is automatically disabled.

•Since this unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers, connect at least a 5.1 = channel speaker system when using this li_atm'e.

•You can specify a video signal to be output during a multi-channel audio reproduction (page 49). If your DVD player has analog multi-channel output jacks, connect them to the MULTI CH INPUT jacks while making a video connection (component video or composite).

• Connecting an external amplifier

If you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Each PRE OUT jack outputs the same channel signals as the corresponding speaker terminals.

•When you make connections to the PRE OUT jacks, do not make any connections to the speaker terminals.

@	FRONT	PRE	OUT		jacks
	Front channel		output		jacks.
@	SURROUND			PRE	OUT		jacks
	Surround	channel		output		jacks.
@	SUN.BACK		PRE		OUT		jacks
	Surround back output jacks. When you only connect one
	external anaplifier I_r the surround back channel, connect it to
	the left SUN.BACK				(SINGLE)jack.
	--'4'--
	• To output surround back channel signals at these jacks, set
	"Sun'ound Speaker" to any parameter except "None" (page 56).
@	CENTER	PRE		OUT		jack
Multi-format player or external decoder	Center channel		output jack.
(7.1-channel output)	SUBWOOFER			PRE		OUT 112 jack
(_)

Connect :l sub'a, oofer "a,ith a built-in amplifier.

16En