Yamaha RX-V1065 To turn off the GUI screen, press ION, Cinema DSP basic parameters DSP Level

Although the field sound programs would satisfy you as they are with the default parameters, you can arrange sound effect or decoders suitable for acoustical conditions

of sources or rooms by setting the parameters.

-4'--

•You cannot configure the parameters when "Memory Guard" is set to "On" (page 6(t).

1Turn on the video monitor connected to this unit.

2Press I_ON SCREEN on the remote control.

The GUI screen appears on the video monitor.

3Press []Cursor V to select "Setup" and then press []ENTER.

4Press []Cursor A / V to select "DSP Parameter" and then press []ENTER.

Sound field program

Sound fiei parameters Set' _lues

Press []Cursor A / V to select "Program Name" and then press []Cursor <1 / I;> to select a sound field program to edit.

Press []Cursor A / V to select a parameter to edit and then press []Cursor <1 / I;> to change the setting.

For details on functkms find adjustable ranges of the

sound field parameters, see "Sound field parameters"

on this page.

-4'--

•Repeat steps 5 and 6 to change other sound field program parameters.

7To turn off the GUI screen, press I_ON

SCREEN.

To initialize the parameters of the selected sound field

program, press [Cursor			V repeatedly to select
"Initialize"	and then	press	[Cursor	t:>. Then,	press
[Cursor	t:> again	to execute the		initialization	or
[Cursor	<:1to cancel it.

?_t I

• The defimlt settings are marked with '"::"

CINEMA DSP basic parameters

DSP Level

Adjustable range: 6dB to 0dB* to +3dB

Fine adjusts fin effect level (level of the sound field effect to be added). You can adjust the level of the sound field effect while checking sound levels. Adjust "DSP Level" as follows.

*The effect sound is too soft.

*There are no differences between effects of the sound field programs.

--+Increase the effect level.

°The sound is dull.

°The sound field effect is added too much. --+Reduce the effect level.

Dialogue Lift

Choices: 0* to 5

Use this feature to adjust the vertical position of the dialogues in movies. The ideal position of the dialogues is at the center of the video monitor screen.

ideal dialogue position

If the dialogues are heard at the lower position of the video monitor screen, increase the value of "Dialogue Lift".

Move up to the ideal dialogue position

When the value is set to zero, the position is at the lowest. The position gets higher as you increase the value.

•This setting is available only when "Extra Speaker Assignment" is set to "Presence" (page 56).

•You cannot move the dialogue position down from the initial dialogue position.

3D DSP

Choices: On*, Off

When CINEMA DSP 3D is enabled, sets whether to use

sound field programs in 3D mode.

50En