Yamaha RX-V1065 Bass Crossover Frequency, Subwoofer Phase, Speaker Level, Speaker Distance, Unit

Bass Crossover Frequency

Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz,

160Hz, 200Hz

Sets the lower limit of the low-frequency component output from a speaker with a size set to "Small" (Small x 1, Small x 2) Sound with a frequency below that limit is output from a subwoofer or front speakers.

If your subwoofer has a volume control or a crossover frequency control, set the volume to half or the crossover frequency at the maximum.

Subwoofer Phase

Choices: Normal*,Reverse

Sets the phase of your subwoofer if bass sounds are lacking or unclear.

Normal	Select	this not to change the phase of your
	subwoofer.
Reverse	Select	this to reverse the phase of your
	subwoofer.

•Speaker Level

Adjustable range: 10.0dB to +10.0dB (0.SdB step)

Defaults:0dB (FR.L, FR.R, SWFR, PR.L, PR.R)

1.0dB (CNTR, SUR.L, sUn.R, SBL, SBR)

Separately adjusts volume of each speaker so that the sounds form speakers are at the same volume at the listening position. Items to be displayed vary depending on the number of speakers connected.

-4'--

•When only one surround back speaker is connected. "SB" appears instead of "SBL" and "SBR".

•You can adjust the volume listening to test tones when you set "Test Tnne" to "On" (on this page).

•If your subwonlbr has a w_lmne control or a crossover fl'equency control. set the w_lume to half or the crossover fl'equency at the maximum.

•Speaker Distance

Adjusts timing at which each speaker outputs sound so that sounds from speakers reach the listening position at the same time. Set unit (Unit) first and set the distance of each speaker.

Unit

Choices: feet (ft)*, meters On)

feet (ft)	Displays	the	speaker	distance	in	feet.
meters (m)	Displays	the	speaker	distance	in	meters.

FR.L / FR.R / CNTR / SUR.L / SUR.R / SBL / SBR / SWFR / PR.L / PR.R

Adjustable range: 0.30m to 24.00m (l.0ft to 80.0ft)

Defaults: 3.00md0.0ft) (FR.L,FR.R, SWFR,PR.L,

PR.R)

2.60m(8.Sft) (CNTR)

2.40m(8.0ft) (SUR.L, sUn.R, SBL, SBR)

-4'--

•Available items diflbr depending on the "Speaker Cnnliguratinn" settings (page 55).

•Wben only one surround back speaker is connected. "SB" appears instead of "SBL" and "SBR".

_eI_OIf_d[m_-`_1ii_O[:Ij_1_[-`I_1"_1_e_w##[_j

•Equalizer

Adjusts sound quality and tone using a parametric graphic equalizer.

EQ Type Select

Choices: Auto PEQ, GEQ*, Off"

Selects an equalizer type.

Auto PEQ	Uses	a parametric				equalizer			selected	in
	"Auto Setup". Characteristics of the
	currently used parametric equalizer are
	displayed		below "Auto				PEQ".
GEQ	Uses	a graphic			equalizer.			Press [j_]I_NTI_R
	to adjust the characteristics of the graphic
	equalizer.
Off	Not	use a graphic				equalizer.
GEQ
Channels		Front	Left,	Front		Right,	Center, Surround Left,
		Surround		Right, Surround				Back Left,		Surround
		Back	Right
Choices:		63Hz,	160Hz,		400Hz,		lkHz,		2.5kHz,	6.3kHz,
		16kHz
Adjustable	range:	6.0dB to		0dB*		to +6.0dB		(0.5dB step)

Adjusts sound quality of each speaker using a graphic equalizer. The graphic equalizer of this unit can adjust signal levels in 7 frequency ranges.

To adjust the signal level within each range, press

_]Cursor <:1/ t:> to select the desired speaker while "Channel" is selected, press [j_]Cur$or/_ / V to select the desired frequency band and then press [j_]Cur$or <:1/ t:> to adjust the signal level.

•Test Tone Choices: Off*, On

Switches between on and off of an oscillator that generates test tones. When "On" is selected, you can adjust the settings of "Manual Setup" while listening to a test tone.

Off	Not generate test tones.
On	Generates test tones.

You can set various items for sound outputs.

•Dynamic Range Choices: Min/Auto,STD, Max*

Selects the dynamic range adjustment method for reproducing bitstream signals.

Min/Auto (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for Dolby TrueHD signals.

(Auto) Adjusts the dynamic range for Dolby TrueHD signals based on input signal information.

STDSets the standard dynamic range recommended for regular home use.

57En