Yamaha RX-V1065 Selecting a Scene, Keys Input source Sound field program, Hdmi l Straight, 22 En

BASICOPERATION

1Turn on external components (TV, DVD player, etc.) connected to this unit.

2Rotate the @INPUT selector (or press []Input selection key) to select an input source.

The name of the selected input source is displayed for a few seconds.

Input source name

["i :...;.L

_%,-_

•You can also select an input source from the GUI screen (page 23).

•You can change the input source name displayed on the front panel display or GU1 screen as necessary (page 60).

Play the external component that you have

selected as the source input, or select a radio station on the tuner.

Refer to the operating instructions of the external component for details on playback. For selecting radio stations or playback of an iPod, Bluetooth component or USB storage device using this unit, see the following.

*FM/AM radio tuning (page 29)

*iPod playback (page 42)

*Bluetooth component playback (page 44)

*USB storage device playback (page 45)

4Turn the @VOLUME control (or press

[]VOLUME +/-) to adjust the volume.

Volume

			....	IC_
				ILl ' _,71[
[ i ..	"!	"i :':	!:2" .it"=	_
..................................				.....

Note

When you play back a DTS-CD, noise may be output in some

conditions, which may cause a speaker malfunction. Make sure that the volume is set to low before starting playback. If noise is output, do the t_llowing.

1) When only noise is output

If a DTS bitstream signal is not properly input to this unit,

only noise is output. Connect the playback component to this

unit by digital connection and play back the DTS-CD. If the

condition is not improved, the problem may results fi'om the

playback component. Consult the manufacturer of the

playback component.

2)When noise is output during playback or skip operation

Before playing back the DTS-CD, display the Option menu

after selecting the input source and set "Decoder Mode" to "DTS" (page 48).

This unit has a SCENE function that allows you to change input sources and sound field programs with one key. Four scenes are available for different usages, such as playing

movies or music. The following input sources and sound field programs are provided as the initial factory settings.

Keys	Input source	Sound field program
BD/DVD	HDMI l	Straight
TV	AV 1	Straight
CD	AV 3	Straight
RADIO	TUNER	7ch Enhancer

•When this unit is on standby, you can turn on this unit by pressing

@SCENE (or _SCENE).

•If you connect a Yamaha DVD/CD player that has the capability of the SCENE control signals to the REMOTE OUT jack of this unit, you can start playback on the player by using the SCENE lunction.

Selecting a SCENE

Press @SCENE (or _SCENE).

_%,;

• You can also select a SCENE from the GU1 screen/page 23).

22En