66 En, This unit fails to turn, See, Remedy

APPENDIX

Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.

Problem

This unit does not operate properly,

This unit suddenly enters the standby mode

This unit fails to turn

on or enters the standby mode soon after the power is turned on.

This unit cannot be turned off.

No picture.

Cause

The internal nlicrocomputer is frozen dne to an external electric shock (such as lightning or excessive static electricity) or by a drop in power supply voltage.

The internal temperature is too high and the overheat protection circuitry has been activated.

The protection circuitry has been activated because of a short circuit, etc.

The sleep timer has turned off this unit.

The power cable is not connected or the

plug is not completely inserted,

The speaker impedance setting is incorrect.

(When this unit is turned back on and "CHECK SP WIRES !" is displayed.) The protection circuitry has been activated because this unit was turned on while a speaker cable was shorted.

The internal microcomputer is frozen due to an external electric shock (such as lightning or excessive static electricity) or by a drop in power supply voltage.

An appropriate video input is not selected on the video monitor,

The external video component is connected to one of the HDMI 1-4 jacks while your video monitor is connected to the MONITOR OUT (COMPONENT VIDEO or VIDEO)jacks.

This unit outputs the video signals not supported by the video monitor connected to the HDMI OUT jack.

Video signals are input from a game console while your video monitor is connected to the HDMI OUT jack.

Non-standard video signals are input.

See

Remedy

page

Disconnect the power cable from the AC wall outlet, wait about 30 seconds and then plug it in again.

Wait about 1 hour fur this unit to cool down and then turn it back on.

Check that the speaker impedance setting is correct.

Check that the speaker wires are not touching each other and then turn this unit back on.

Tnrn on this unit and play the source again.

Connect the power			cable	properly	to	an AC wall		18
outlet.
Set the	speaker	impedance		to match		your	speakers.	64
Make	sure that	all	speaker	cables	bet'a, een		this unit	11

and speakers are connected properly.

Disconnect the power cable from the AC wall outlet, wait about 30 seconds and then plug it in again.

Select an appropriate video input on the video monitor.

Connect	the	external		video		component		to the	video	14, 15
input jacks other			than	the	HDMI 1-4 jacks or connect
the video monitor to the HDMI OUT jack.
Displays	the	advanced		setup		menu	and	select		64
"VIDEO" in "INIT" to reset the video parameters.
Displays	the	advanced		setup		menu	and	set		64
"MON.CHK"		to	"YES".
Connect	the	video monitor				to the	MONITOR		OUT	14
(COMPONENT			VIDEO)jacks.
Connect	the	video monitor				to the	MONITOR		OUT	14
(COMPONENT			VIDEO		or VIDEO) jacks.

66En

RX-V1065 specifications

The Yamaha RX-V1065 is a versatile home theater receiver that has made a mark for its performance, features, and sound quality. As part of Yamaha’s RX series, it embodies a blend of innovative technologies and advanced audio capabilities, appealing to both casual listeners and audiophiles alike.

One of the standout features of the RX-V1065 is its audio power handling. With a robust 7-channel amplifier, it delivers a total output of 110 watts per channel, ensuring a dynamic and immersive sound experience. The receiver supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, which enhances the home theater experience with crystal-clear audio and an expansive sound stage.

The RX-V1065 is equipped with Yamaha’s proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This groundbreaking feature uses a microphone and measurement system to analyze your room's acoustics and adjust the audio settings automatically. This ensures optimal sound quality, regardless of the room's shape or size.

In addition to its impressive audio capabilities, the RX-V1065 offers a comprehensive range of connectivity options. It includes HDMI inputs and outputs, allowing for high-definition video and audio to seamlessly pass between devices. With support for 4K video pass-through, it prepares users for the future of high-resolution content. The receiver also boasts numerous analog and digital inputs, catering to various audio and video sources.

The receiver’s user-friendly interface and remote control enhance ease of use, allowing users to navigate through settings and adjust audio configurations effortlessly. The on-screen graphical user interface simplifies the setup process, making it accessible even for those less familiar with home theater systems.

Another technological highlight of the RX-V1065 is its capability to be integrated with various streaming services, thanks to built-in network functionality. Users can access popular online music services directly, enabling them to enjoy their favorite tunes without the need for additional devices.

In summary, the Yamaha RX-V1065 is a feature-rich home theater receiver that delivers powerful audio performance combined with innovative technologies. Its robust surround sound capabilities, automated room calibration with YPAO, and extensive connectivity options make it a sought-after choice for anyone looking to elevate their home entertainment experience. With its blend of functionality and sound quality, the RX-V1065 continues to stand out in a crowded market of home theater receivers.