Yamaha RX-V1065 Lipsync, Hdmi Auto kipsync, Hdmi Control, Standby Through, Audio Output

Max	Outputs sound without adjusting the
	dynamic range of the input signals.

•Lipsync

Adjusts delay between vide() output and audio output.

HDMI Auto kipsync

Choices: Oft _:, On

Automatically adjusts output timing of audio and video

signals when a TV that supports an automatic lip-sync function is connected to this unit.

Off	Select	this when		the	connected		TV does not
	support	the	automatic		lip-sync function or
	you do	not use		the automatic			lip-sync
	function. Set the correction					time in "Manual
	Delay".
On	Select	this when		the	connected		TV supports
	the automatic		lip-sync function. Fine adjust
	the correction time in "Auto Delay".

Auto Delay

Adjustable range: 0'_ to 240ms (I Ills step)

Fine adjust the correction time when "HDMI Auto

Lipsync" is set to "On". The actual correction time is

displayed under in "Auto Delay" field and an offset time set by the user in "Offset" field.

Manual Delay

Adjustable range: 0_ to 240ms (I ms step)

Manually fine adjusts the correction time. Select this when

the connected TV does not support the automatic lipsync function or you set "HDMI Auto Lipsync" to "OFF'.

You can set various items for HDMI and display.

HDMI

You can set items for HDMI.

•HDMI Control

Choices: On, OfP _

Selects on or off of the HDMI control function when a component that supports the HDMI control function is connected with this unit. When this parameter is set to "On", this unit output signals input from the HDMI 1-4 jacks to the video monitor even when this unit is on standby.

On	Enables the HDMI control function.
Off	Disables the HDMI control function.

-4'--

•Tbe _)HDMI THROUGH indicator lights up in the fnllowing cases while this unit is on standby.

-when the HDMI control fnnction is nn

-when the HDMI signal standby-through function is currently working

•When "HDMI Control" is set to "On'. this unit consumes 1 to 3 watts of power depending on a condition nf an HDMI signal passing through this unit.

•Standby Through

Choices: On, OfP _

Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the HDMI OUT jack when this unit is on standby. When this parameter is set to "On", this unit output signals input from the HDMI 1-4 jacks to the video monitor even when this unit is on standby.

On	Outputs the HDMI signals to the HDMI OUT
	jack.
Off	Not output the HDMI signals to the HDMI
	OUT jack.

-4'--

•This parameter is not available when "HDMI Control" is set to "On".

•To enables HDMI signal standby-through output, any one of the input sources connected to the HDMI 1=4 jacks must be selected befk_re switching to standby.

•When "Standby Through" is set to "On", the (_HDMI THROUGH indicator lights up. In this state, this unit consumes up to 3 watts of powel" even nn standby.

•Audio Output

Choices: Amplifier_% TV, Amplifier + TV

Selects this unit or a component connected to the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI 1-4 jacks.

Amplifier Outputs HDMI sound signals form the speakers connected to this unit.

TVOutputs HDMI sound signals from the speakers of a TV connected to this unit. Sound output from the speakers connected to this unit is muted.

Amplifier + Outputs HDMI sound signals from the

TVspeakers connected to this unit and the speakers of a TV connected to this unit.

•Signal lormats of audio and visual signals output fl'om this unit to the TV vary depending on specifications of the monitor.

-4'--

•This parameter is not available when "HDMI Control" is set to "On".

•Resolution

Choices: Through_:,480p, 720p, I080i, I080p

Upscales the resolution of HDMI output that is converted from analog video input signals and output from the HDMI OUT jack.

•Resolution of the HDMI output converted fl'om 720p nr 1080i analog viden signals cannot be upscaled.

•When a vide<) monitor is connected to the HDMI OUT iack of this unit, this unit automatically detects a resolution that the monitor supports. An asterisk (":) appears nu the left of the detected resolution.

•If this unit cannot detect the resolution that the monitor supports, set "MON.CHK" in the advanced setup menu to "SKIP" (page 64) and try again.

58En