Yamaha RX-V1065 Cursor, ENTER, Return, External component operation keys, TV control keys

You can control external components for a selected input

controlling external components are as follows:

[]SOURCE POWER

Turns on and off an external component.

[Cursor, ENTER, RETURN

Operates the menus of external components.

[_External component operation keys

Function as a recording or playback key of an external component, or a menu display key.

[]Numeric keys

Functkm as numeric keys of an external component.

[TV control keys

INPUTSwitches visual inputs of TV

MUTEMutes audio of TV

TV VOL +/- Controls the volume of TV

TV CH +/- Switches channels of TV

POWER Turns on and off TV

[_DISPLAY

Switches between the screens of external components.

"4':

• You can use {_TV control keys only for controls nf TV regardless

nf selected input sources.

•You need to set the remote cnntrol cnde first to control external components.

source with the remote control. The keys available for

Input source	Category	Manufacturer	Default
			code
[USB]
[DOCK]	DOCK	Yamaha	5011
[TUNER]	Tuner	Yamaha	5007
[SIRIUS1	Tuner	Yamaha	5017
[XM]	Tuner	Yamaha	5009
[MULTI]

.... indicates no assignment

-4':

•An external component cnntrolled by the remote control is automatically selected according to selection nf tile scenes (page 22).

You can control other components by setting the appropriate remote control codes. For a complete list of available remote control codes, refer to "List of remote control codes" at the end of this manual.

You should perform each step within 1 minute after the previous step.

•The remote control keys lor comrolling external compnnems are available nnly when tile external components have corresponding control keys.

The following remote control codes are assigned to input sources as factory default settings. For a complete list of available remote control codes, refer to "List of remote control codes" at the end of this manual.

•Default remote control code settings

Default

Input source Category Manufacturer code

[HDMI 1] Blu-ray Disc Yamaha 2018

[HDMI2]

[HDMI 3]

[HDMI 4]

[AV11

[AV21

[AV 3] CD Yamaha 5013

IAV4]

IAV51

[AV61

IAUDIO 1]

[AUDIO2]

[V-AUXI

[PHONO]

Press [CODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

[]TRANSMIT blinks twice.

2 Press the desired _lnput selection key.

3 Press [Numeric keys to enter a remote

control code.

Once the remote control code is registered,

[I_TRANSMIT blinks twice. If it fails,

[]TRANSMIT blinks six times. Repeat from

step 1.

You can reset all remote control codes to the factory

default settings.

Press [CODE SET on the remote control using a pointed object such as a tip of a ballpoint pen.

[]TRANSMIT blinks twice.

2Press []ON SCREEN.

3Press []Numeric keys to enter "9981"

Once the initialization is complete, I_]TRANSMIT blinks twice. If it fails, [I_TRANSMIT blinks six times. Repeat from step 1.

I

I

63En