Yamaha RX-V1065 owner manual Source, Volume Trim

Page 50

ADVANCEDOPERATION

This unit has an Option menu of frequently used menu items for input sources compatible with this unit. The procedure for setting the Option menu items is described below.

Rotate the @INPUT selector (or press

[]Input

selection

key)

to select the

desired

input source,

The following menu items are provided for each input

 

 

 

source.

2Press []OPTION on the remote control.

The Option menu for the selected input source is displayed. For details about the Option menu items of each input source, see "Option menu items" on this page.

3Press [Cursor A / V to select the desired menu item and then press [ENTER,

Parameters of the selected menu item are displayed.

4 Press [Cursor A / V / <1 / t> to select the desired setting and then press [ENTER

5To exit the Option menu, press [OPTION.

To return to the previous menu, press []RETURN.

•In case [_Cursor A / V / <1 / t> or odler keys do not work after

closing file Option menu, press []Input selection key to select lhe current input source again.

Input

Source

HDMII-4

Volume

Trim

 

AVI-4

Volume

 

Trim

AV 5-6

Volume

 

Trim

AUD]OI/2

Volume

 

Trim

V-AUX

Volume

 

Trim

PHONO

Volume

 

Trim

USB

Volume

 

Trim

iPod(DOCK)

Volume

 

Trim

BLUETOOTH

Volume

(DOCK)

Trim

TUNER

Volume

 

Trim

SIRIUS

Volume

 

Trim

XM

Volume

 

Trim

MULTI CH

Volume

 

Trim

Menu item

Decoder Extended Signal Info

ModeSurround

Decoder Extended Signal Info

ModeSurround

Signal Info Shuffle Repeat

ShuffleRepeat

Connect/ Pairing

Disconnect

AudioAutoClear

ModePreset Preset

ClearParental

PresetLock

Clear

Preset

Video Out

Details of the menu items are as follows:

--'4'--

• The default settings are marked with '':".

Volume Trim

Input source:

All

 

 

Adjustable

range:

6.0dB

to

0.0dB* to +6.0dB

 

 

(in 0.5

dB

steps)

Reduces any change in volume when switching input

sources by correcting volume differences between input sources.

You can set this parameter for each input source.

47En

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Page Explanation of Graphical Symbols Riskof Electricshock Do Notopen@MAIN Voltage SelectorAt the end of this manual Using iPod TMOther Input/Output terminals Built-in 7-channel power amplifierAutomatic speaker setup features Output terminalsIPod TM Bluetooth TMColor A D Y@ Front panel display Antenna @ XM jack@ Multich Input jacks Speakers@ Mute indicator @ ZONE2 indicator@ Sleep indicator @ Volume indicatorTuner keys Cursors / l g l l l t Selectmenuitemsorchange7En Hdmi Turn on the powerConnect your components Cable AudioPreparation Channel speaker layout Center speaker C Channel speaker layoutFront left and right speakers FL and FR Surround left and right speakers SL and SRPresence speakers Presence left and right speakers PL and PRChannel with Zone2 speakers 11 EnBanana plug Tl,llll Ii,II,IiFront speakers Right Left Video jacks Audio jacksVideo/audio jacks To connect component video monitor Outputting TV sounds from this unitTo connect an Hdmi video monitor To connect composite video monitor¶/lllll/ll Audio and video player / Set-top boxInput jack Input sourceAudio player Connecting a multi-format player or an external decoderConnecting an external amplifier About audio/video output terminalsControl Transmitting/receiving remote control signalsRemote Control out USB memory device or USB portable audio playerIqllllillff Power again to turn off this unit standby modePress @MAIN Zone ON/OFF or Press and hold InsertTo the @OPTIMIZER MIC jack on the front Allow small children to enter the room during the procedureConnect the supplied PanelNatural Speaker ConfigPress Enter to confirm the settings FlatTo return to the top result display, press Enter again Terminates the measurement and Auto SetupRetry To select Retry or Exit and then pressHdmi l Straight Selecting a SceneKeys Input source Sound field program 22 EnRegistering input source/sound field Program Press on Screen on the remote controlPress Nmute on the remote control to mute the audio output Components linked to scene selectionsOption menu for the selected input source is Displayed Plug your headphones in the @PHONES jack on Front panelPress Cursor a / to select Signal Info Then press Enter To exit the Option menu, press OptionSelecting a sound field program on the front panel Selecting a sound field program with the remote controlFor movie/TV program sources Movie Foraudio Music sourcesMUSIC For stereo reproduction StereoA. model only For multichannel stereo Repr0ductionSTEREONeural Sur 27 EnStraight appears on the front panel display To enable straight decode mode, pressTo cancel straight decode mode, press 28 EnPreset Select a preset number Registering stations by manual station PresetCalling a preset station Preset tuning Tune in to the desired stationBehavior of the display When multiple audio programs are providedWhen only one audio program is provided Ii,i, i ,, r32 En Front panel displayFollowing information is displayed on the GUI screen 33 En Listening to Satellite RadioSirius XM Radio Legal Sold separatelyRepeatedly to search for a channel within all channels All Channel Search modeCategory Search mode Category 1 / I to select the channel categoryClearing preset channels Calling a preset channel Preset Search modeRepeatedly to change the preset channel number 36 En Channel number, channel nameAntenna reception level, channel number SiriusConnect Tuner and the antenna Sold separately SiriusConnect tuner37 En Channel number Channel nameCategory / C to select the channel category Display, press @TUNING/CH /E orCategory Search mode The first channel in the category While CAT is displayed on the front panelOption menu for Sirius is displayed ModeFor details, see Sirius Satellite Radio operations 39 EnChannels Repeat steps 6 through 8 to lock all the desired channelsDisplay example !!!.d.e Composer name, channel numberDi.iPP!o g!.!.!rq 41 EnKey Function Controlling iPod in simple remote modeControlling iPod in menu browse mode Subsequentmenu Menu up Menu down PreviousmenuShuffle/repeat playback Menu items of VideosPlay information display RepeatStart playback of the Bluetooth component Option menu for Bluetooth is displayedSearching appears and the pairing operation starts 44 EnPress Enter to start play back Sh uffle/repeat playbackTo return to the previous menu, press Option menu for USB is displayedTurn on all devices connected to this unit With Hdmi Enable the Hdmi control function on each DevicePress Sleep repeatedly to set the amount of time For details, refer to the manual supplied with your deviceVolume Trim SourceAudio Mode Decoder ModeSignal Info Auto PresetVideo Out PairingConnect / Disconnect Press Cursor/ / V to select Video Out and then press EnterTo turn off the GUI screen, press ION Press Cursor V to select Setup and then press EnterCursor Again To execute Initialization 1to cancel it Cinema DSP basic parameters DSP Level51 En Parameter for Movie sound field programs Parameters for adjusting reverberant soundParameters for certain sound field Programs Parameters for 7ch StereoDecoder parameters DimensionParameter for Straight Enhancer and 7ch Effect Level Parameter for PLIIx Music and Plii Music PanoramaOUT 54 EnMenu/Submenu Function Manual Setup Press Cursor 7to select Setup and then press JenterAuto Setup Speaker ConfigurationParameter Extra Speaker AssignmentLFE / Bass Out Front SpeakerSpeaker Level Subwoofer PhaseBass Crossover Frequency Speaker DistanceHdmi Auto kipsync ResolutionLipsync Hdmi ControlVolume Selecting a name to be displayed from templates Zone2 Max VolumeZone2 Initial Volume Entering an original nameImportant safety notice Using the internal amplifier of this unitUsing an external amplifier 61 EnSwitching to the Zone2 operation mode To control Zone2 by using the remote controlExternal component operation keys Default remote control code settingsCursor, ENTER, Return TV control keysPress on Screen Setting a remote control IDPress @MAIN Zone ON/OFF to set this unit to standby Enter the desired remote control ID code 65 EnSee 66 EnThis unit fails to turn RemedyDisturbed ProblemCause67 En Remedy SeeFormat Back speakers68 En Noise/hum noise is69 En Check XM Tuner ProblemCause70 En 71 En Invalid 72 EnLoading Not AvailableUnknown iPod Status messageLoading 73 EnRecognized.HDDs Status message Discon nected Unable to play Searching74 En During Auto Setup 75 EnError After Auto Setup8NO Signal 76 EnAudio and video synchronization lip sync Component video signalComposite video signal Bi-amplification connectionDTS Digital Surround DTS-HD High Resolution AudioDTS 96/24 DTS ExpressColor 79 EnReverberations Elements of a sound fieldEarly reflections Virtual Cinema DSPAudio signal types Signal formats Compatible Media Hdmi signal compatibility Audio signalsVideo signals 81 En82 En Numerics 83 En84 En 85 En @MAIN Zone ON/OFF or0104 Tovox3268 01190,0096Lngersol LnFocusLngelen InitialSEG NEIOnceas SSSVcfi BlackEll Lnnnvatinn Lnnn Hit1076 Instant ReplayMintek BrandtMinowa MitsubishiCable Blu-ray DiscDVD Recorder Sattelite BocaLape TunerCD Recoder Oyamaha @YAMAHA Remote control Press Cursor a / g to select Video Out and then press Enter Rotate the Input selector or pressOption menu for Audio I or AUDIO2 is displayed I=2 E!+ +Information about software About Vorbis library

RX-V1065 specifications

The Yamaha RX-V1065 is a versatile home theater receiver that has made a mark for its performance, features, and sound quality. As part of Yamaha’s RX series, it embodies a blend of innovative technologies and advanced audio capabilities, appealing to both casual listeners and audiophiles alike.

One of the standout features of the RX-V1065 is its audio power handling. With a robust 7-channel amplifier, it delivers a total output of 110 watts per channel, ensuring a dynamic and immersive sound experience. The receiver supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, which enhances the home theater experience with crystal-clear audio and an expansive sound stage.

The RX-V1065 is equipped with Yamaha’s proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This groundbreaking feature uses a microphone and measurement system to analyze your room's acoustics and adjust the audio settings automatically. This ensures optimal sound quality, regardless of the room's shape or size.

In addition to its impressive audio capabilities, the RX-V1065 offers a comprehensive range of connectivity options. It includes HDMI inputs and outputs, allowing for high-definition video and audio to seamlessly pass between devices. With support for 4K video pass-through, it prepares users for the future of high-resolution content. The receiver also boasts numerous analog and digital inputs, catering to various audio and video sources.

The receiver’s user-friendly interface and remote control enhance ease of use, allowing users to navigate through settings and adjust audio configurations effortlessly. The on-screen graphical user interface simplifies the setup process, making it accessible even for those less familiar with home theater systems.

Another technological highlight of the RX-V1065 is its capability to be integrated with various streaming services, thanks to built-in network functionality. Users can access popular online music services directly, enabling them to enjoy their favorite tunes without the need for additional devices.

In summary, the Yamaha RX-V1065 is a feature-rich home theater receiver that delivers powerful audio performance combined with innovative technologies. Its robust surround sound capabilities, automated room calibration with YPAO, and extensive connectivity options make it a sought-after choice for anyone looking to elevate their home entertainment experience. With its blend of functionality and sound quality, the RX-V1065 continues to stand out in a crowded market of home theater receivers.
Top Page Image Contents