Yamaha RX-V1065 Press @MAIN Zone ON/OFF to set this unit to standby, Setting a remote control ID

In the advanced setup menu, you can set basic operations of this unit, such as on and off of a bi-amp connection, or initialize user settings.

1Set this unit to standby.

2While holding down (_)STRAIGHT on the front panel, press @MAIN ZONE ON/OFF.

Keep holding down _)STRAIGHT until "ADVANCED SETUP" appears on the front panel display.

: : :,," ,=, : : : : %,' :,,,, :,," .... , :,,,, : %,' :

3Rotate the @PROGRAM selector to select the parameter you want to change.

The default setting are marked with "*"

_%,-_

•Sel values are placed in XXX ollhe lollowing parameters on an aclual display screen.

.,- :..	,:, :. ,: :.-,	: ,: :, ,: :, ,:
2:V	i. MI"=	--:.'..'..'=

Choices: 6f_MIN,8f_MIN*

Selects output impedance of this unit according to connected speakers. When you connect 4-ohm

speakers to the FRONT speaker terminals, set "SP IMP." to "6QMIN.".

!:;i:E!'!0!E !i[) ....::.:::;.:;::.:;

Choices: IDI*, ID2

Sets a remote control ID. When using multiple Yamaha AV receivers, you can operate them with a single remote control by setting the receive]- IDs to the same setting.

: ::	::::.:	.,,,.,,,.,,,
.,.,:.,	: ,:,: :	: :: :: :
Choices:		RESET,CANCEL*

Resets Parental lock cord when using SIRIUS Satellite tune]'.

E:!i !::!!'!F..... ::::.:;.:::;.:;

Choices: ON, OFF*

Switches on and off of bi-amp connection of main speakers. For bi-amp connection, see page 12.

.,-,.,-,:.-,:	:: ....	:,	:.-,	: :: :: :
i:::=!...i:2 H 1:2		.[	i'=:i....	,:':=,:':=

Choices: ON*, OFF

Selects whether or not to transmit the control signals to an external component connected to the REMOTE

OUT jack on this unit when BD/DVD or CD SCENE function is selected.

i'.'h":i,	i	:"'i	ii."	:.,=:,,=:,,=:,,=
: =.,.,:	= ::	.,.,:	=: ,,	: =: =: =: =

Choices: YES*, SKIP

Adds upscaling limitation on output signals to a video monitor connected to this unit via the HDMI OUT jack.

T i, i T 'T" :. ,=:. ,= :, ,=:, ,=:, ,= :, ,=:, ,= :, ,=:, ,=

!!',! ! ! "-" .,'.,.,'., .,'.,.,'., .,'..,'..,'..,'..,'.,

Choices: DSP PARAM, VIDEO, ALL, CANCEL*

Initializes various settings stored in this unit. You can select an initialization method from the following. DSP PARAM: All parameters of sound field

	programs
VIDEO	Video conversion settings (resolution/
	aspect) in the Setup menu and the GUI
	display position
ALL	All
CANCEL	Cancellation of initialization

4Press _)STRAIGHT repeatedly to change the selected parameter setting.

To change other settings, repeat steps 3 and 4.

Press @MAIN ZONE ON/OFF to set this unit to standby.

The settings you made are reflected next time you turn on this unit.

You can check the firmware of this unit and update the firmware using the USB port on the front panel.

Select the following parameter in step 3 above.

:,., ,:. :,-,:,,= : =:,-,:,., .,..,:.,:,., i'- i i'1"i11 i ii'-'i ii,.i i i"

:,:,1.,1 = .,.,: 1,.,1 = : 1,.,

Updates the firmware of this unit. To update the firmware, select "FIRM UPDATE" and then press (_)STRAIGHT.

•Do not use this feature unless you need to updale the firmware.

•Be sure to read informalion supplied vvrihupdates belk)re updatillg Ihe _]rmware.

i i r- i"11, ,11,,11,,1 1,,11,,11,,1 1,,11,,11,,1

:..,=E:. r=:.:.':..='.:=.'.::= :.':..='.:=.'.::= :.'.:=.':..='.=

Displays the firmware of this unit.

Setting a remote control ID

Two IDs are provided for the remote control of this unit. If another Yamaha amplifier is in the same room, setting a different remote control ID to this unit prevents unwanted operation of the other amplifier.

"IDI" is set for both the main unit and remote control by default. If you have changed the remote control ID, make sure that you select the same ID for the main unit in the the advanced setup menu.

Press _CODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

[_TRANSMIT blinks twice.

2 Press [_ON SCREEN.

64En