Philips BL-C10 operating instructions Setting Home Position/Sensor Position/Preset Button

Page 17

Operating Instructions

1.2.4Setting Home Position/Sensor Position/Preset Button

The home position, sensor position and 8 preset buttons can be registered. Preset buttons (1—4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. These buttons can be changed (see page 20).

•Registered buttons are shown in blue.

•Unregistered buttons are shown in white.

When clicking each button, the image switches to the home/sensor/preset position. When restarted, the camera takes a home position. If the Lens Position When Triggered setting is set (see page 61), the camera takes a sensor position after the pyroelectric infrared sensor detects temperature differences.

Registering Home Position/Sensor Position

1.Click [Program].

•	[Program] switches to [Cancel].	Home
	Click [Cancel] to quit without saving	Position
	changes.

2.Pan and tilt the camera to a desired position.

3.Click the home position button or the sensor position button.

4.Click [Save].

•When finished, "Success!" is displayed.

•Clicking [Back] takes you back to the previous page without changing the settings.

5.Click [Back].

•The bar switches to the operation bar.

Pan/Tilt

Program

Sensor

Position

17

Image 17

Contents Network Camera Operating InstructionsProtecting privacy Privacy Monitoring Purpose Privacy modeMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Protocol DescriptionOperating Important Safety Instructions Table of Contents Index Camera MaintenanceCamera Monitoring Accessing the CameraClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image End Display Preset Pan/Tilt Scan Using Operation BarHome PositionPan/Tilt Range Pan/Tilt OperationRegistering Home Position/Sensor Position Setting Home Position/Sensor Position/Preset ButtonRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera How to save a still image to your PC When the image is not displayed on the Multi-CameraOn the Single Camera or Multi-Camera On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Various Camera FeaturesBasic Network IndicatorTo connect the camera to the network see CameraAutomatic Setup Connecting the Camera to Your NetworkStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Items Administrator General Users Guest Users Administrator/General Users/Guest UsersLogging in to the Camera Creating, Modifying or Deleting General Users Access from guest users From guest usersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Maintenance Status MaintenanceDefault Restart Restarts the camera seeRestarting the Camera Confirming the StatusUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Product Information SupportSeeing Help Seeing Support Information Factory Default Reset Button Basic Default Setting ListItems Default Required AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Lens CleaningCleaning the Main Unit Local IP Address Setting an IP Address on Your PCSteps Class Subnet Mask Local IP AddressFinding the camera Using Setup ProgramOperating Instructions Manual Setup window Automatic Setup Local or Internet Access or Manual SetupHow to Set the Proxy Server Settings Setting Your PCSetting the Proxy Server Settings on Web Browser See if the check Operating Instructions Setting the Internet Temporary File Setting on Web Browser Setting UPnP to Display Camera Shortcut in My Network PlacesAscii Character Table File Size and Number of Buffered Images Other Specifications Items SpecificationsNetwork Camera Items Specifications Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright