Operating Instructions
3.1.5Loading Settings from a Configuration File
The settings can be loaded from a configuration file. If you reset the camera to factory default, the camera can load its settings from the configuration file.
Notes
•The configuration file has network settings. When the settings are loaded, the network settings are also loaded as they were saved.
•If there is a firmware version difference between the camera that you create a configuration file from and the camera that you try to load settings to, the settings may not be loaded to the camera. Save settings after updating the firmware.
1.Click [Load Settings] on the Maintenance page.
2.Click [Browse...].
3.Select the configuration file on the Choose file dialog box, and click [Open].
•The file name is displayed in the data field.
4.Confirm the file name, and click [Load].
5.Click [Restart].
•The camera restarts, and the Top page is displayed.
80