Philips BL-C10 operating instructions Operating Instructions

Page 42

Operating Instructions

2.7Changing Authentication Setting and Administrator User Name and Password

The Security: Administrator page allows you to change authentication, administrator user name and password. The authentication window is displayed, and allows the registered users to access the camera.

Notes

•If you access the camera for the first time, the window to set administrator user name and password is displayed. Make a note of the user name and password so that you will not forget them.

•The user name and password should be secured at your own responsibility. Pay attention to the following points.

•Set the user name and password as many characters as possible.

•Change the password regularly.

•Setting [Permit access from guest users] (permitting access without a User Name or Password) at General Authentication risks the images being viewed by third parties. Control the contents of the images accordingly.

IMPORTANT

•It is important to limit access to the camera by use of a unique User Name and a secret Password. Because the camera is accessed through the Internet it is possible that the camera could be accessed by unknown individuals, including those who are commonly known as "hackers," to whom you do not want to allow access. The use of a unique User Name and a Password known only to you will help insure that only authorized individuals are given access to the camera. You have the option of proceeding without a User Name and Password, but it is strongly recommended that you utilize these protections.

1.Click [Administrator] on the Setup page.

2.Set each parameter.

•Clicking [Cancel] cancels your settings without saving changes.

42

Image 42

Contents Operating Instructions Network CameraMonitoring Off Privacy Monitoring Purpose Privacy modeProtecting privacy Remote monitoringEasy installation using UPnPTM Universal Plug and Play Description OperatingProtocol Important Safety Instructions Table of Contents Camera Maintenance IndexAccessing the Camera Camera MonitoringClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image Home Using Operation BarEnd Display Preset Pan/Tilt Scan PositionPan/Tilt Operation Pan/Tilt RangeSetting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor PositionRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera On the Single Camera or Multi-Camera When the image is not displayed on the Multi-CameraHow to save a still image to your PC On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Various Camera Features Using Camera FeaturesTo connect the camera to the network see IndicatorBasic Network CameraConnecting the Camera to Your Network Automatic SetupStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Administrator/General Users/Guest Users Items Administrator General Users Guest UsersLogging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General UsersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Default MaintenanceMaintenance Status Restart Restarts the camera seeConfirming the Status Restarting the CameraUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Support Seeing HelpSeeing Product Information Seeing Support Information Factory Default Reset Button Default Setting List Items Default RequiredBasic AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning Cleaning the Main UnitCleaning the Lens Steps Setting an IP Address on Your PCLocal IP Address Class Subnet Mask Local IP AddressUsing Setup Program Finding the cameraOperating Instructions Automatic Setup Local or Internet Access or Manual Setup Manual Setup windowSetting Your PC Setting the Proxy Server Settings on Web BrowserHow to Set the Proxy Server Settings See if the check Operating Instructions Setting UPnP to Display Camera Shortcut in My Network Places Setting the Internet Temporary File Setting on Web BrowserAscii Character Table File Size and Number of Buffered Images Specifications Network Camera Items SpecificationsOther Specifications Items Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright