Philips BL-C10 operating instructions Name by E-mail or FTP transfer uses only 24 h format

Page 37

		Operating Instructions

	Setting	Description

	Time Setting	• Select date and format (AM/PM or 24 H). These settings
		are used for image buffer/transfer, operation time and time
		stamps on the buffered image. But E-mail subject and file
		name by E-mail or FTP transfer uses only 24 h format.

	Automatic Time	• NTP (Network Time Protocol) server synchronizes the
	Adjustment	camera's internal clock. It adjusts automatically every day.
		Check the box to enable it.
		• Set the NTP server IP address, set 4 digits (0—255) and 3
		periods such as "192.168.0.253". But "0.0.0.0" and
		"255.255.255.255" are not available. Or set a host name
		(1—255 characters).
		• Select your time zone.
		Note
		If the time is incorrect by more than one hour, Automatic
		Time Adjustment stops working to prevent malfunctions
		caused by a disguised NTP server.

	Adjust Clock for	• During the daylight saving time, the internal clock is turned
	Daylight Saving	forward an hour. The clock will shift one hour forward at the
	Time	set time on the Start Day, and move back one hour at the
		set time on the End Day. Check the box to enable it.
		Note
		An "s" is put between date and time of time stamp when
		enabling this feature. The time stamp will be attached to
		the transferred images by the Image Transfer feature.

3.Click [Save] when finished.

•New settings are saved.

•When finished, "Success!" is displayed.

4.Click [Go to Date and Time page].

•The Date and Time page is displayed.

Note

Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended.

37

Image 37

Contents Network Camera Operating InstructionsProtecting privacy Privacy Monitoring Purpose Privacy modeMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Operating DescriptionProtocol Important Safety Instructions Table of Contents Index Camera MaintenanceCamera Monitoring Accessing the CameraClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image End Display Preset Pan/Tilt Scan Using Operation BarHome PositionPan/Tilt Range Pan/Tilt OperationRegistering Home Position/Sensor Position Setting Home Position/Sensor Position/Preset ButtonRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera How to save a still image to your PC When the image is not displayed on the Multi-CameraOn the Single Camera or Multi-Camera On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Various Camera FeaturesBasic Network IndicatorTo connect the camera to the network see CameraAutomatic Setup Connecting the Camera to Your NetworkStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Items Administrator General Users Guest Users Administrator/General Users/Guest UsersLogging in to the Camera Creating, Modifying or Deleting General Users Access from guest users From guest usersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Maintenance Status MaintenanceDefault Restart Restarts the camera seeRestarting the Camera Confirming the StatusUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Help SupportSeeing Product Information Seeing Support Information Factory Default Reset Button Items Default Required Default Setting ListBasic AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Main Unit CleaningCleaning the Lens Local IP Address Setting an IP Address on Your PCSteps Class Subnet Mask Local IP AddressFinding the camera Using Setup ProgramOperating Instructions Manual Setup window Automatic Setup Local or Internet Access or Manual SetupSetting the Proxy Server Settings on Web Browser Setting Your PCHow to Set the Proxy Server Settings See if the check Operating Instructions Setting the Internet Temporary File Setting on Web Browser Setting UPnP to Display Camera Shortcut in My Network PlacesAscii Character Table File Size and Number of Buffered Images Network Camera Items Specifications SpecificationsOther Specifications Items Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright