Philips BL-C10 operating instructions Viewing Still Images on Your Mobile Phone

Page 25

Operating Instructions

1.5Viewing Still Images on Your Mobile Phone

You can view still images over the Internet from a compatible mobile phone.

Enter "http://IP address (or URL):Port Number/mobile" on a mobile phone and press [OK].

•When the port number is set to 80 (default), it is not required.

E.g. http://XXX.XXX.XXX.XXX:50000/mobile (or XXXXX.viewnetcam.com:50000/mobile)

•When an authentication window is displayed, enter the administrator's or the general user's user name and password.

•A still image is displayed. (Video [Motion JPEG] cannot be displayed.)

Pressing 2, 4, 6 or 8 on the mobile phones allows you to pan or tilt the camera in four directions: Left, Up, Down or Right.

Pressing 5 will refresh the image.

160 x 120 resolution is displayed at the first access. Pressing 0 switches the resolution to 320 x 240.

Executing [Home Position] moves the lens to the home position.

Pressing 1, 3, 7 or 9 on the keypad allows you to use the first four registered preset buttons.

Registered presets 5—8 are available by activating the link on the mobile phone page.

If you execute [Privacy Mode] here, the camera switches to privacy mode. To disable it, access the camera again and execute [Disable Privacy Mode] (see page 73).

25

Image 25

Contents Network Camera Operating InstructionsProtecting privacy Privacy Monitoring Purpose Privacy modeMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Operating DescriptionProtocol Important Safety Instructions Table of Contents Index Camera MaintenanceCamera Monitoring Accessing the CameraClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image End Display Preset Pan/Tilt Scan Using Operation BarHome PositionPan/Tilt Range Pan/Tilt OperationRegistering Home Position/Sensor Position Setting Home Position/Sensor Position/Preset ButtonRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera How to save a still image to your PC When the image is not displayed on the Multi-CameraOn the Single Camera or Multi-Camera On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Various Camera FeaturesBasic Network IndicatorTo connect the camera to the network see CameraAutomatic Setup Connecting the Camera to Your NetworkStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Items Administrator General Users Guest Users Administrator/General Users/Guest UsersLogging in to the Camera Creating, Modifying or Deleting General Users Access from guest users From guest usersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Maintenance Status MaintenanceDefault Restart Restarts the camera seeRestarting the Camera Confirming the StatusUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Help SupportSeeing Product Information Seeing Support Information Factory Default Reset Button Items Default Required Default Setting ListBasic AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Main Unit CleaningCleaning the Lens Local IP Address Setting an IP Address on Your PCSteps Class Subnet Mask Local IP AddressFinding the camera Using Setup ProgramOperating Instructions Manual Setup window Automatic Setup Local or Internet Access or Manual SetupSetting the Proxy Server Settings on Web Browser Setting Your PCHow to Set the Proxy Server Settings See if the check Operating Instructions Setting the Internet Temporary File Setting on Web Browser Setting UPnP to Display Camera Shortcut in My Network PlacesAscii Character Table File Size and Number of Buffered Images Network Camera Items Specifications SpecificationsOther Specifications Items Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright