Philips BL-C10 operating instructions They usually have two addresses

Page 32

Operating Instructions

Setting

Description

 

 

Default Gateway*1

• If you have the assigned Default Gateway address by your

(Static/DHCP Only)

ISP or network administrator, enter it in this data field.

 

• Set 4 digits (0—255) and 3 periods such as

 

"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are

 

not available.

 

 

DNS Server

• DNS server address is required in the following conditions.

Address*1

• Transferring camera images by E-mail or FTP

(Static/DHCP Only)

• Setting cameras by their host names on the Multi-

 

Camera Setup page

 

• Using the Viewnetcam.com service

 

• If you have the assigned DNS server addresses by your

 

ISP or network administrator, enter them in this data field.

 

They usually have two addresses.

 

• Set 4 digits (0—255) and 3 periods such as

 

"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are

 

not available.

 

 

Max. Bandwidth

• The bandwidth can be restricted.

Usage

• Select the maximum bandwidth usage from [Unlimited] to

 

[0.1 Mbps].

 

Note

 

Set the maximum bandwidth usage seeing the following

 

file sizes. These are examples for a JPEG file with a

 

standard image quality. File sizes may change depending

 

on the image quality or how bright the object is.

 

160 x 120 pixels: About 3 KB (24 Kbit)

 

320 x 240 pixels: About 10 KB (80 Kbit)

 

640 x 480 pixels: About 18 KB (144 Kbit)

 

 

Connection Type

• Normally, Select [Auto Negotiation]. If you cannot access

 

the camera, see page 20 "The Top page is not displayed."

 

in the Installation/Troubleshooting.

*1 If you automatically obtain the IP address from the DHCP server, you do not need to set it.

32

Image 32
Contents Operating Instructions Network CameraPrivacy Monitoring Purpose Privacy mode Protecting privacyMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Protocol DescriptionOperating Important Safety Instructions Table of Contents Camera Maintenance IndexAccessing the Camera Camera MonitoringClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image Using Operation Bar End Display Preset Pan/Tilt ScanHome PositionPan/Tilt Operation Pan/Tilt RangeSetting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor PositionRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera When the image is not displayed on the Multi-Camera How to save a still image to your PCOn the Single Camera or Multi-Camera On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Various Camera Features Using Camera FeaturesIndicator Basic NetworkTo connect the camera to the network see CameraConnecting the Camera to Your Network Automatic SetupStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Administrator/General Users/Guest Users Items Administrator General Users Guest UsersLogging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General UsersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Maintenance Maintenance StatusDefault Restart Restarts the camera seeConfirming the Status Restarting the CameraUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Product Information SupportSeeing Help Seeing Support Information Factory Default Reset Button Basic Default Setting ListItems Default Required AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Lens CleaningCleaning the Main Unit Setting an IP Address on Your PC Local IP AddressSteps Class Subnet Mask Local IP AddressUsing Setup Program Finding the cameraOperating Instructions Automatic Setup Local or Internet Access or Manual Setup Manual Setup windowHow to Set the Proxy Server Settings Setting Your PCSetting the Proxy Server Settings on Web Browser See if the check Operating Instructions Setting UPnP to Display Camera Shortcut in My Network Places Setting the Internet Temporary File Setting on Web BrowserAscii Character Table File Size and Number of Buffered Images Other Specifications Items SpecificationsNetwork Camera Items Specifications Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright