Philips BL-C10 operating instructions When you set FTP for Transfer Method

Page 57

Operating Instructions

When you set [FTP] for Transfer Method

Select [FTP], and click [Next>]. The following page is displayed.

Clicking [<Back] takes you back to the previous page.

Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

Setting

Description

 

 

Server IP

• If you set the server IP address, set 4 digits (0—255) and 3

Address or

periods such as "192.168.0.253". But "0.0.0.0" and

Host Name*1

"255.255.255.255" are not available. Or set a host name (1—

 

255 characters).

 

 

Port No.

• Enter the number (1—65535). Usually set to 21.

 

 

Login ID*1

• If your ISP requires a login ID, set it (0—63 characters).

 

 

Password*1

• If your ISP requires a password, set it (0—63 characters).

 

 

Login Timing

• Select the login timing to an FTP server. If you set [One Time]

 

during 1-minute transfer, the camera logs in to the server only

 

once, and can reduce the time to log in or log out.

 

 

Upload File

• Set the file name to save on an FTP server. Enter 1—234

Name*1

characters. Entering "\" creates directories for a file. (E.g.

 

NetworkCamera\image.jpg)

 

 

Overwrite

• Selecting [Overwrite File] saves and overwrites the image on

setting

the server. Selecting [Save as New File with Time Stamp]

 

saves the image attaching time stamps on the file name, and

 

the images are not overwritten.

 

 

Data

• Select [Passive Mode] normally. If FTP does not work, select

Transfer

[Active Mode] and check the operation.

Method

 

 

 

*1 But [Space], ["], ['], [&], [<] and [>] are not available.

57

Image 57
Contents Network Camera Operating InstructionsProtecting privacy Privacy Monitoring Purpose Privacy modeMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Description OperatingProtocol Important Safety Instructions Table of Contents Index Camera MaintenanceCamera Monitoring Accessing the CameraClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image End Display Preset Pan/Tilt Scan Using Operation BarHome PositionPan/Tilt Range Pan/Tilt OperationRegistering Home Position/Sensor Position Setting Home Position/Sensor Position/Preset ButtonRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera How to save a still image to your PC When the image is not displayed on the Multi-CameraOn the Single Camera or Multi-Camera On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Various Camera FeaturesBasic Network IndicatorTo connect the camera to the network see CameraAutomatic Setup Connecting the Camera to Your NetworkStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Items Administrator General Users Guest Users Administrator/General Users/Guest UsersLogging in to the Camera Creating, Modifying or Deleting General Users Access from guest users From guest usersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Maintenance Status MaintenanceDefault Restart Restarts the camera seeRestarting the Camera Confirming the StatusUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Support Seeing HelpSeeing Product Information Seeing Support Information Factory Default Reset Button Default Setting List Items Default RequiredBasic AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning Cleaning the Main UnitCleaning the Lens Local IP Address Setting an IP Address on Your PCSteps Class Subnet Mask Local IP AddressFinding the camera Using Setup ProgramOperating Instructions Manual Setup window Automatic Setup Local or Internet Access or Manual SetupSetting Your PC Setting the Proxy Server Settings on Web BrowserHow to Set the Proxy Server Settings See if the check Operating Instructions Setting the Internet Temporary File Setting on Web Browser Setting UPnP to Display Camera Shortcut in My Network PlacesAscii Character Table File Size and Number of Buffered Images Specifications Network Camera Items SpecificationsOther Specifications Items Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright