Operating Instructions
Basic |
|
|
(1) | Network | Configures the network settings such as connection mode |
|
| to connect the camera to the network (see page 29). |
(2) | UPnP | Enables automatic port forwarding or shortcut to the |
|
| camera (see page 33). |
(3)Viewnetcam. Registers with the Viewnetcam.com service (see page 34). com
(4)Date and Time Sets the date and time, automatic time adjustment and adjust clock for daylight saving time settings (see page 36).
(5) Camera | Sets camera name, white balance, AC power source |
| frequency and pan/tilt range (see page 38). |
Account
(6) Administrator*1 Sets authentication setting and administrator security (user name and password) (see page 42).
(7) General User*1 Sets general user security (user name and password) and general user's feature restriction (see page 46).
Advanced
(8)Image Display Sets resolution, image quality and refresh interval of Single Camera and
(9)
(10)Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page 53 or page 60).
(11)Operation Time Sets time period to display camera images (see page 70).
(12) Indicator | Sets indicator display (see page 72). |
Control |
|
(13)Privacy Mode Enables privacy mode (see page 73).
*1 If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi- Camera Setup page] settings, changes will not be applied to the video (Motion JPEG) viewers. Restart the camera to make changes applied to all video viewers.
28