Operating Instructions
2.13 Buffering or Transferring Images by Sensor
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E- mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Sensor] for trigger, and click [Next>].
•Click [Delete Buffered Images] to delete this buffered images.
•Click [Save] to save the settings. The buffered images are deleted.
•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.
Setting | Description |
|
|
Enable Image | • Check the box to enable the buffer/transfer. Clear the box |
Buffer/Transfer | to disable it. |
|
|
Trigger | • Selecting [Timer] enables the camera to buffer/transfer the |
| image by timer. |
| • Selecting [Sensor] enables the camera to buffer/transfer |
| the image by sensor. |
|
|
60