Philips BL-C10 operating instructions Setting Description

Page 31

		Operating Instructions

	Setting	Description

Allow Access from		• Allow Access from the Internet setting automatically
the Internet		configures the router's Port Forwarding setting (some
(Automatic Setup		routers call it "Address Translation", "Static IP
Only)		Masquerade", "Virtual Server" or "Port Mapping"). To
		enable Internet access to the camera, check [Yes]. In this
		case, the camera automatically searches the unused port
		number on your network in the order of 80 and from 50000
		to 50050. To disable Internet access to the camera, check
		[No].

Network		• If you prohibit the Setup Program from changing the
Configuration from		network settings, clear the check box.
Setup Program
(Static/DHCP Only)

Port Number		• You can set the camera port number (80 by default). When
(Static/DHCP Only)		you use multiple cameras with a router on your network,
		each camera must be assigned its own port number (see
		page 12 "1.5 Connecting the Camera to a Router Not
		Supporting UPnP™" in the Installation/Troubleshooting).
		• Do not set the following port numbers.
		E.g., FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53,
		POP3: 110, HTTPS:443, ICQ: 4000 and IRC: 6661—6667.
		• Enter only the number (1—65535).
		• Some ISPs do not allow you to use port 80. Ask your ISP
		or network administrator about the accessible port number
		over the Internet.

•	IP address	• If your ISP or network administrator specifies the IP
•	Subnet Mask	address and subnet mask, enter them in each data field.
(Static Only)		• If you use the camera on the LAN, set the IP address in the
		same class as your PC (see page 94).
		• Set 4 digits (0—255) and 3 periods such as
		"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
		not available.

Host Name		• If your ISP uses the DHCP function which automatically
(DHCP Only)		assigns the IP address to the camera, enter the ISP-
		assigned host name. (Host name may be used as an
		authentication.)
		• Enter ASCII characters for the host name (see page 102).
		But [Space], ["], ['], [&], [<] and [>] are not available.

31

Image 31

Contents Network Camera Operating InstructionsRemote monitoring Privacy Monitoring Purpose Privacy modeProtecting privacy Monitoring OffEasy installation using UPnPTM Universal Plug and Play Operating DescriptionProtocol Important Safety Instructions Table of Contents Index Camera MaintenanceCamera Monitoring Accessing the CameraClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image Position Using Operation BarEnd Display Preset Pan/Tilt Scan HomePan/Tilt Range Pan/Tilt OperationRegistering Home Position/Sensor Position Setting Home Position/Sensor Position/Preset ButtonRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera On the Buffered Image When the image is not displayed on the Multi-CameraHow to save a still image to your PC On the Single Camera or Multi-CameraViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Various Camera FeaturesCamera IndicatorBasic Network To connect the camera to the network seeAutomatic Setup Connecting the Camera to Your NetworkStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Items Administrator General Users Guest Users Administrator/General Users/Guest UsersLogging in to the Camera Creating, Modifying or Deleting General Users Access from guest users From guest usersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Restart Restarts the camera see MaintenanceMaintenance Status DefaultRestarting the Camera Confirming the StatusUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Help SupportSeeing Product Information Seeing Support Information Factory Default Reset Button Items Default Required Default Setting ListBasic AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Main Unit CleaningCleaning the Lens Class Subnet Mask Local IP Address Setting an IP Address on Your PCLocal IP Address StepsFinding the camera Using Setup ProgramOperating Instructions Manual Setup window Automatic Setup Local or Internet Access or Manual SetupSetting the Proxy Server Settings on Web Browser Setting Your PCHow to Set the Proxy Server Settings See if the check Operating Instructions Setting the Internet Temporary File Setting on Web Browser Setting UPnP to Display Camera Shortcut in My Network PlacesAscii Character Table File Size and Number of Buffered Images Network Camera Items Specifications SpecificationsOther Specifications Items Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright