Philips BL-C10 When the image is not displayed on the Multi-Camera, On the Buffered Image

Page 22

Operating Instructions

•When viewing video (Motion JPEG), we recommend using an Ethernet® switching hub instead of the repeater hub to prevent degradation in video display.

•Due to the network congestion or the number of accesses, the refresh interval may slow down.

•When the refresh interval is slow, restrict the bandwidth on the Network page (see page 32). The refresh interval may be improved.

•If the video (Motion JPEG) display is limited (see page 48), the video will be changed to refreshing still images.

•To reduce the data traffic, the video (Motion JPEG) can be automatically changed to refreshing still images (see page 48).

•When viewing 4 cameras on the Multi-Camera page, you may need 3 to 4 Mbps bandwidth. If the bandwidth is not enough, the refresh interval may slow down.

When the image is not displayed on the Multi-Camera page

•Confirm that the Internet IP address is specified for each camera and that each camera is connected to the Internet. For Internet access, local IP addresses (192.168.xxx.xxx) cannot be used.

•Confirm the settings on the Multi-Camera Setup page (see page 51).

•Confirm that the web browser is not accessing the proxy server (see page 98).

How to save a still image to your PC

On the Single Camera or Multi-Camera page

•A still image can be saved using the capture image button (see page 14).

On the Buffered Image page

•A still image can be saved on the Buffered Image page, if you are not playing images on it. Put the cursor on the image, and right-click it. Then select [Save Picture As...].

When setting [Do not permit access from guest users] on the Security: Administrator page

•An authentication window is displayed in camera access. Enter the administrator's or the general user's user name and password.

•When you view the images on the Multi-Camera page, all authentication windows of the configured cameras are displayed. Enter the administrator's or the general user's user name and password registered for each camera.

22

Image 22

Contents Operating Instructions Network CameraMonitoring Off Privacy Monitoring Purpose Privacy modeProtecting privacy Remote monitoringEasy installation using UPnPTM Universal Plug and Play Operating DescriptionProtocol Important Safety Instructions Table of Contents Camera Maintenance IndexAccessing the Camera Camera MonitoringClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image Home Using Operation BarEnd Display Preset Pan/Tilt Scan PositionPan/Tilt Operation Pan/Tilt RangeSetting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor PositionRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera On the Single Camera or Multi-Camera When the image is not displayed on the Multi-CameraHow to save a still image to your PC On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Various Camera Features Using Camera FeaturesTo connect the camera to the network see IndicatorBasic Network CameraConnecting the Camera to Your Network Automatic SetupStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Administrator/General Users/Guest Users Items Administrator General Users Guest UsersLogging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General UsersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Default MaintenanceMaintenance Status Restart Restarts the camera seeConfirming the Status Restarting the CameraUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Help SupportSeeing Product Information Seeing Support Information Factory Default Reset Button Items Default Required Default Setting ListBasic AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Main Unit CleaningCleaning the Lens Steps Setting an IP Address on Your PCLocal IP Address Class Subnet Mask Local IP AddressUsing Setup Program Finding the cameraOperating Instructions Automatic Setup Local or Internet Access or Manual Setup Manual Setup windowSetting the Proxy Server Settings on Web Browser Setting Your PCHow to Set the Proxy Server Settings See if the check Operating Instructions Setting UPnP to Display Camera Shortcut in My Network Places Setting the Internet Temporary File Setting on Web BrowserAscii Character Table File Size and Number of Buffered Images Network Camera Items Specifications SpecificationsOther Specifications Items Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright