Philips BL-C10 operating instructions Is not available

Page 68

Operating Instructions

Setting	Description

Subject	• Enter a subject with ASCII characters (see page 102) or
	characters in each language (0—44 characters for a 1-byte
	character and 0—22 characters for a 2-byte character). But
	["] is not available.

Text	• Enter text with ASCII characters (see page 102) or
	characters in each language (0—63 characters for a 1-byte
	character and 0—31 characters for a 2-byte character). But
	["] and [end-of-line] key are not available.

*1 But [Space], ["], ['], [&], [<] and [>] are not available.

9.After you confirm the settings and click [Next>], set E-mail notification and click [Next>].

•If you select [Enable], the E-mail Notification When Triggered page is displayed. Enter the settings seeing page 67 and page 68. When finished, click [Next>] and go to step 10.

Setting		Description

Disable	•	The camera does not send an E-mail notification when
		buffering or transferring image.

Enable	•	The camera sends an E-mail notification (up to 3
		destinations) when buffering or transferring image.

10.Click [Save] after confirming the settings.

•New settings are saved. The buffered images are deleted.

•When finished, "Success!" is displayed.

68

Image 68

Contents Operating Instructions Network CameraPrivacy Monitoring Purpose Privacy mode Protecting privacyMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Protocol DescriptionOperating Important Safety Instructions Table of Contents Camera Maintenance IndexAccessing the Camera Camera MonitoringClick the following tabs to display each Viewing Single Camera Security Warning window Banner Image Auto Centering Click to Center Capturing a Still Image Using Operation Bar End Display Preset Pan/Tilt ScanHome PositionPan/Tilt Operation Pan/Tilt RangeSetting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor PositionRegistering a Preset Button Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera When the image is not displayed on the Multi-Camera How to save a still image to your PCOn the Single Camera or Multi-Camera On the Buffered ImageViewing Buffered Image Deleting Buffered Images Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Various Camera Features Using Camera FeaturesIndicator Basic NetworkTo connect the camera to the network see CameraConnecting the Camera to Your Network Automatic SetupStatic Setup Dhcp Setup Setting Description They usually have two addresses Using UPnP Universal Plug and Play Setting Description Confirming the Internet access Setting Date and Time Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Position and preset buttons Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Administrator/General Users/Guest Users Items Administrator General Users Guest UsersLogging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General UsersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Setting Description Setting Description FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Buffering or Transferring Images by Sensor Setting Description Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Is not available Minute Specifying Operation Time About Operation Time Changing Indicator Display Enabling Privacy Mode Maintenance Maintenance StatusDefault Restart Restarts the camera seeConfirming the Status Restarting the CameraUpdating the Camera Firmware Operating Instructions Updated version Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Product Information SupportSeeing Help Seeing Support Information Factory Default Reset Button Basic Default Setting ListItems Default Required AM/PM Camera Camera Name Account Advanced Multi Multi-Camera Blank Display Buffer Status Off Transfer Trigger Preset Buttons Cleaning the Lens CleaningCleaning the Main Unit Setting an IP Address on Your PC Local IP AddressSteps Class Subnet Mask Local IP AddressUsing Setup Program Finding the cameraOperating Instructions Automatic Setup Local or Internet Access or Manual Setup Manual Setup windowHow to Set the Proxy Server Settings Setting Your PCSetting the Proxy Server Settings on Web Browser See if the check Operating Instructions Setting UPnP to Display Camera Shortcut in My Network Places Setting the Internet Temporary File Setting on Web BrowserAscii Character Table File Size and Number of Buffered Images Other Specifications Items SpecificationsNetwork Camera Items Specifications Other Specifications Items 106 Index Operating Instructions Top Update Firmware UPnP Web Browser 109 Copyright