Orion/2 Outdoor
3.3Configuration Menu
The detailed functions and parameter settings of your high speed dome can be set by the OSD (On Screen Display) menu with a control device, such as Ernitec control keyboard. The functions in OSD menu are described in the following sections.
26x Model |
| 22/23x Model |
|
MAIN PAGE 1 |
| MAIN PAGE 1 |
|
DEFAULT CAMERA | OFF | DEFAULT CAMERA | OFF |
BACKLIGHT | OFF | BACKLIGHT | OFF |
FOCUS | AUTO | FOCUS | AUTO |
AE MODE | AUTO | APERTURE | AUTO |
WBC MODE | AUTO | AE MODE | AUTO |
ID DISPLAY | ON | WBC MODE | AUTO |
SETUP MENU1 |
| ID DISPLAY | ON |
SETUP MENU2 |
| SETUP MENU | ENTER |
To enter the OSD menu of the selected camera, press <CAMERA MENU> button on the control keyboard and hold for 3 seconds to enter the OSD menu.
To select the setup item, use direction keys on keyboard to move the OSD cursor in the OSD menu.
To setup item, use direction keys on keyboard to move the OSD cursor in the OSD menu. For items with →, press right/left direction buttons on the control keyboard to select. For items with ↓, press <CAMERA MENU> button on the control keyboard to enter sub menu. For items with →↓, users can use the right/left direction buttons to select functions then press the <CAMERA MENU> button on the control keyboard to enter its sub menu.
For further detailed setup procedures, please refer to the user’s manual of your installed control devices.
3.3.1DEFAULT CAMERA
The DEFAULT CAMERA is used to restore the camera settings (e.g. Backlight/Focus/AE/WBC/Aperture). Once any one of the items is modified, the setting will become <OFF> automatically. Select <ON> for this item to recall the mentioned camera parameters.
NOTE: On 26x model, the Aperture function is provided in SETUP MENU2, instead of DEFAULT CAMERA.
20