Philips Orion/2 manual IR Function Removable IR Cut, Record Start, Record END, RUN Cruise

Page 38

Orion/2 Outdoor

CRUISE
RECORD START	ENTER
RECORD END	ENTER
RUN CRUISE	ENTER
EXIT	YES

•RECORD START

Follow the description to record the CRUISE path.

1.Rotate the dome camera to a desired view area, and press <ENTER> to build the cruise path using joystick on the control device. The percentage of the memory buffer will be displayed on the screen.

2.Pan, tilt the dome camera to form a path. The zoom setting is only available with 26x model.

NOTE: Beware of the memory size when building the cruise path. After the percentage of the buffer becomes 100%, the path will not be recorded.

•RECORD END

The cursor will be moved to RECORD END while building the cruise line; when the setting is completed, press <ENTER> to save the path.

•RUN CRUISE

After the setting is completed, select this item to manually execute the Cruise function.

•EXIT

Exit the CRUISE setup menu.

3.3.17IR FUNCTION (Removable IR Cut)

With the IR cut filter, the dome can still catch clear image at night time or very dark light condition. During day time, the IR cut filter will be on to block the infrared light for clear image; during night time, the IR cut filter will be removed to catch infrared light to view images in black and white. Only with 23x model, users are able to view color images when the IR function activated.

Refer to the description to operate the removable IR cut filter.

26x Model:

•AUTO

The Internal circuit will automatically decide the occasion to remove the IR cut filter according to the value of light condition calculated by the internal algorithm.

37

Image 38

Contents Installation & User Instructions Orion/2 Outdoor Copyright Important Information RegulationDo not block cooling holes on the bracket Handle the camera carefullyDo not disassemble the camera Never face the camera towards the sunOverview Connecting the High Speed DomeOperation and Configuration Appendix a Technical Specification Appendix B Ernitec Erna Appendix C Protocol-Pelco Appendix D Philips AllegiantOverview Product Features Connecting the High Speed Dome Package ContentSwitch Definition Communication Switch SettingDome ID Setting Dome Control Protocol22-Pin Connector Definition 2400Pin Cable 11~20For connection to Ernitec equipment, use Rx+ and Rx Alarm Pin DefinitionRS-485 Connector Operation and Configuration OSD Display FormatOSD Menu Tree 1 26x ModelCruise 2 22x / 23x Model WDR Setting Schedule Reset Schedule Exit 26x Model 22/23x Model Configuration MenuDefault Camera 26x Model BacklightFocus AutoAperture ManualShutter AE ModeBright GainWBC Mode AGCOutdoor ID DisplayIndoor ATWImage Setup MenuOFF Zoom Speed Slow Shutter 23x ModelFirst Setup MENU2 26x Model OnlyTitle Display LastTitle Setting Alarm SettingAlarm Type Alarm PINAlarm Switch Alarm ActionHome Setting Return Time Select ModeSequence Sequence Point Preset PositionSequence Line SpeedAutopan Line AutopanDwell Time RUN Sequence Start PointDirection CruiseEND Point RUN AutopanRecord END IR Function Removable IR CutRecord Start RUN CruiseDetect Mode Alarm Detect 26x Model OnlyDetect Switch ThresholdWDR Setting 23x Model Only WDR Function Privacy SwitchPrivacy TransparencyCenter ColorSET Mask Size 00~80Center 000~256 Mask CLEAR+RESETShade Size 000~127Time Display Time FunctionSchedule Function Year / Month / DAYExit OSD Appendix a Technical Specification Appendix B Ernitec Erna Cruise Tour Run Preset TourIris function Special Function Symbol DefinitionControl Dome Camera Using Pelco Keyboard Cable LengthCable Definition P Protocol Keyboard to Speed Dome Cable Definition D Protocol Keyboard to Speed DomeControl Dome Camera Using Allegiant Keyboard Appendix D Philips AllegiantOSD Menu Notes 26x ModelAutopan 22/23x Models WDR Setting