Philips Orion/2 manual Copyright Important Information, Regulation

Page 3

Orion/2 Outdoor

Preface

The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice.

Notice

To work with the High Speed Dome Cameras, any installer or technician must have the following minimum qualifications:

•A basic knowledge of CCTV systems and components

•A basic knowledge of electrical wiring and low-voltage electrical hookups

•Have read this manual completely

Copyright

Under copyright laws, the contents of this user manual may not be copied, photocopied, translated, reproduced or reduced to any electronic medium or machine-readable format, in whole or in part, without prior written permission of the company.

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.

Regulation

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2

Image 3

Contents Installation & User Instructions Orion/2 Outdoor Regulation Copyright Important InformationNever face the camera towards the sun Handle the camera carefullyDo not disassemble the camera Do not block cooling holes on the bracketConnecting the High Speed Dome Operation and ConfigurationOverview Appendix C Protocol-Pelco Appendix D Philips Allegiant Appendix a Technical Specification Appendix B Ernitec ErnaOverview Product Features Package Content Connecting the High Speed DomeCommunication Switch Setting Switch DefinitionDome Control Protocol Dome ID Setting2400 22-Pin Connector Definition11~20 Pin CableAlarm Pin Definition RS-485 ConnectorFor connection to Ernitec equipment, use Rx+ and Rx OSD Display Format Operation and Configuration1 26x Model OSD Menu TreeCruise 2 22x / 23x Model WDR Setting Schedule Reset Schedule Exit Configuration Menu Default Camera26x Model 22/23x Model Auto BacklightFocus 26x ModelManual ApertureGain AE ModeBright ShutterAGC WBC ModeATW ID DisplayIndoor OutdoorSetup Menu OFFImage Zoom Speed 23x Model Slow ShutterLast Setup MENU2 26x Model OnlyTitle Display FirstAlarm Setting Title SettingAlarm Action Alarm PINAlarm Switch Alarm TypeHome Setting Select Mode SequenceReturn Time Speed Preset PositionSequence Line Sequence PointStart Point AutopanDwell Time RUN Sequence Autopan LineRUN Autopan CruiseEND Point DirectionRUN Cruise IR Function Removable IR CutRecord Start Record ENDThreshold Alarm Detect 26x Model OnlyDetect Switch Detect ModeWDR Setting 23x Model Only Transparency Privacy SwitchPrivacy WDR FunctionSize 00~80 ColorSET Mask CenterSize 000~127 Mask CLEAR+RESETShade Center 000~256Year / Month / DAY Time FunctionSchedule Function Time DisplayExit OSD Appendix a Technical Specification Appendix B Ernitec Erna Run Preset Tour Iris functionCruise Tour Cable Length Symbol DefinitionControl Dome Camera Using Pelco Keyboard Special FunctionCable Definition D Protocol Keyboard to Speed Dome Cable Definition P Protocol Keyboard to Speed DomeAppendix D Philips Allegiant Control Dome Camera Using Allegiant Keyboard26x Model OSD Menu NotesAutopan 22/23x Models WDR Setting