Philips Orion/2 manual Cruise, END Point, Direction, RUN Autopan

Page 37

Orion/2 Outdoor

•END POINT

Users are able to set the end point after the start point is defined. Pan the dome to another position and press <ENTER> to save the position as the end point.

•DIRECTION

The item is for setting the AUTOPAN direction of dome camera. The dome will start to pan clockwise from the start point to the end point if your selection is <RIGHT>, and then return to the start point. The dome will start to pan anti-clockwise from the start point to the end point if your selection is <LEFT>. Refer to below diagram.

•SPEED

The item is for defining the dome camera rotation speed while running auto-pan. The speed is adjustable from 1 to 4; refer to the table below for details.

	PAN (degree/sec.)
Speed 1	10
Speed 2	23
Speed 3	35
Speed 4	45

•RUN AUTOPAN

After the setting is completed, select this item to manually execute the Auto-pan function.

•EXIT

Exit the AUTOPAN setup menu.

3.3.16CRUISE

A Cruise is a route of manual operations that can be stored and recalled to execute repeatedly. It can be formed of pan, tilt position and zoom parameters (the zoom setting only with 26x model).

36

Image 37

Contents Installation & User Instructions Orion/2 Outdoor Regulation Copyright Important InformationDo not disassemble the camera Handle the camera carefullyDo not block cooling holes on the bracket Never face the camera towards the sunOperation and Configuration Connecting the High Speed DomeOverview Appendix C Protocol-Pelco Appendix D Philips Allegiant Appendix a Technical Specification Appendix B Ernitec ErnaOverview Product Features Package Content Connecting the High Speed DomeCommunication Switch Setting Switch DefinitionDome Control Protocol Dome ID Setting2400 22-Pin Connector Definition11~20 Pin CableRS-485 Connector Alarm Pin DefinitionFor connection to Ernitec equipment, use Rx+ and Rx OSD Display Format Operation and Configuration1 26x Model OSD Menu TreeCruise 2 22x / 23x Model WDR Setting Schedule Reset Schedule Exit Default Camera Configuration Menu26x Model 22/23x Model Focus Backlight26x Model AutoManual ApertureBright AE ModeShutter GainAGC WBC ModeIndoor ID DisplayOutdoor ATWOFF Setup MenuImage Zoom Speed 23x Model Slow ShutterTitle Display Setup MENU2 26x Model OnlyFirst LastAlarm Setting Title SettingAlarm Switch Alarm PINAlarm Type Alarm ActionHome Setting Sequence Select ModeReturn Time Sequence Line Preset PositionSequence Point SpeedDwell Time RUN Sequence AutopanAutopan Line Start PointEND Point CruiseDirection RUN AutopanRecord Start IR Function Removable IR CutRecord END RUN CruiseDetect Switch Alarm Detect 26x Model OnlyDetect Mode ThresholdWDR Setting 23x Model Only Privacy Privacy SwitchWDR Function TransparencySET Mask ColorCenter Size 00~80Shade Mask CLEAR+RESETCenter 000~256 Size 000~127Schedule Function Time FunctionTime Display Year / Month / DAYExit OSD Appendix a Technical Specification Appendix B Ernitec Erna Iris function Run Preset TourCruise Tour Control Dome Camera Using Pelco Keyboard Symbol DefinitionSpecial Function Cable LengthCable Definition D Protocol Keyboard to Speed Dome Cable Definition P Protocol Keyboard to Speed DomeAppendix D Philips Allegiant Control Dome Camera Using Allegiant Keyboard26x Model OSD Menu NotesAutopan 22/23x Models WDR Setting