Philips Orion/2 manual WDR Setting 23x Model Only

Page 40

Orion/2 Outdoor

INT. FOCUS

The alarm will be triggered if the internal focus changes; and if the focus returns to the original position, the alarm will stop.

FIX FOCUS

If focus movement is detected, the alarm will be triggered, and the alarm stops when focus returns to the original position. If the detected focus movement keeps changing for more than four seconds, the new focus position will be memorized as the reference and the alarm will stop.

NOTE: The INT. FOCUS and FIX FOCUS detect modes will be activated only with Auto Focus mode.

INT. AE

When Auto Exposure (AE) movement is detected, the alarm will be triggered; and if the Exposure Level returns to the original level, the alarm will stop.

FIX AE

The alarm will be triggered if the Exposure value changes; if the adjusted AE value retains for four seconds, the value will be saved as the reference and the alarm will stops.

•EXIT

Exit this page.

3.3.19WDR Setting (23x Model Only)

The Wide Dynamic Range function is especially effective in solving indoor and outdoor contrast issues to enhance better image quality and video performance. It enables the dome to catch detailed data from the dark part (Indoor) without any saturation from the bright part (Outdoor). The parameter of WDR function can be set on this page.

NOTE: The Backlight function will automatically turned off when the WDR function is enabled, because the WDR function has better effect than the Backlight compensation.

WDR SETTING
WDR SWITCH	OFF
WDR FUNCTION	AUTO
EXIT	YES

•WDR SWITCH

Enable or disable the WDR function with the item.

39

Image 40

Contents Installation & User Instructions Orion/2 Outdoor Copyright Important Information RegulationHandle the camera carefully Do not disassemble the cameraDo not block cooling holes on the bracket Never face the camera towards the sunOperation and Configuration Connecting the High Speed DomeOverview Appendix a Technical Specification Appendix B Ernitec Erna Appendix C Protocol-Pelco Appendix D Philips AllegiantOverview Product Features Connecting the High Speed Dome Package ContentSwitch Definition Communication Switch SettingDome ID Setting Dome Control Protocol22-Pin Connector Definition 2400Pin Cable 11~20RS-485 Connector Alarm Pin DefinitionFor connection to Ernitec equipment, use Rx+ and Rx Operation and Configuration OSD Display FormatOSD Menu Tree 1 26x ModelCruise 2 22x / 23x Model WDR Setting Schedule Reset Schedule Exit Default Camera Configuration Menu26x Model 22/23x Model Backlight Focus26x Model AutoAperture ManualAE Mode BrightShutter GainWBC Mode AGCID Display IndoorOutdoor ATWOFF Setup MenuImage Zoom Speed Slow Shutter 23x ModelSetup MENU2 26x Model Only Title DisplayFirst LastTitle Setting Alarm SettingAlarm PIN Alarm SwitchAlarm Type Alarm ActionHome Setting Sequence Select ModeReturn Time Preset Position Sequence LineSequence Point SpeedAutopan Dwell Time RUN SequenceAutopan Line Start PointCruise END PointDirection RUN AutopanIR Function Removable IR Cut Record StartRecord END RUN CruiseAlarm Detect 26x Model Only Detect SwitchDetect Mode ThresholdWDR Setting 23x Model Only Privacy Switch PrivacyWDR Function TransparencyColor SET MaskCenter Size 00~80Mask CLEAR+RESET ShadeCenter 000~256 Size 000~127Time Function Schedule FunctionTime Display Year / Month / DAYExit OSD Appendix a Technical Specification Appendix B Ernitec Erna Iris function Run Preset TourCruise Tour Symbol Definition Control Dome Camera Using Pelco KeyboardSpecial Function Cable LengthCable Definition P Protocol Keyboard to Speed Dome Cable Definition D Protocol Keyboard to Speed DomeControl Dome Camera Using Allegiant Keyboard Appendix D Philips AllegiantOSD Menu Notes 26x ModelAutopan 22/23x Models WDR Setting