17 | Sanyo VCC-MD400P, VCC-MD500, VCC-MD300P, VCC-MD800P specs

Communications Protocol

Model: VCC-MD400/300

Message

Camera

OFF

Camera ID display

ID SET (ASCII code)

Camera ID settings

(Note 5)



ID X-Position +

Setting the positioning of the Camera ID display (horizontal)

ID X-Position -

ID Y-Position +

Setting the positioning of the Camera ID display (vertical)

ID Y-Position -

AGC

COLOR MAX Gain

AGC MAX Gain settings during COLOR (0:AGC OFF, 1: -6dB, 2: 0dB, 3: 6dB, 4: 9dB)

B/W MAX Gain

AGC MAX Gain settings during B/W (0:AGC OFF, 1: -6dB, 2: 0dB, 3: 6dB, 4: 9dB, 5:12dB, 6:15dB)

AUTO MAX Gain

AGC MAX Gain settings during AUTO (4: 9dB, 5:12dB, 6:15dB)

AGC ON/OFF

AGC ON/OFF switch (invalid during D/N AUTO) (0:OFF, 1:ON)

Max Gain at AGC ON

AGC MAX Gain settings during AUTO (0: -6dB, 1: 0dB, 2: 6dB, 3: 9dB)

COLOR AGC_OFF Gain +

Gain settings when COLOR and AGC are OFF (Initial value: 0dB)

COLOR AGC_OFF Gain -

B/W AGC_OFF Gain +

Gain settings when B/W and AGC are OFF (Initial value: 0dB)

B/W AGC_OFF Gain -

Gain Preset

Returns gain settings when AGC is OFF to factory defaults

(D/N camera is both COLOR and B/W) (Initial value: 0dB)

Gain Direct (COLOR)

Gain settings when COLOR and AGC are OFF

(0: 0dB, 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB, 10: 30dB)

Gain Direct (B/W)

Gain settings when B/W and AGC are OFF

(0: 0dB, 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB, 10: 30dB)

Gain Direct

Gain setting when AGC is OFF

(0: 0dB, 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB, 10: 30dB)

DNR OFF at AGC ON

DNR ON/OFF

DNR ON at AGC ON

Aperture

OFF

Aperture V +

Vertical contour compensation settings

Aperture V -

Aperture V Preset

Returns vertical contour compensation settings to factory defaults (Initial value: 8)

Aperture V Direct

p: Vertical contour compensation settings 1-15 (Initial value: 8)

Aperture H +

Horizontal contour compensation settings (Initial value: 8)

Aperture H -

Aperture H Preset

Returns horizontal contour compensation settings to factory defaults (Initial value: 8)

Aperture H Direct

p: Horizontal contour compensation settings 1-15 (Initial value: 8)

Gamma

OFF

Gamma OFF (1)

Gamma ON (0.45)

SMART1

Gamma SMART1 (Increases the contrast of dark sections)

SMART2

Gamma SMART2 (Further increases the contrast of dark sections)

Mirror

OFF

Canceling Inversions

H-Mirror

Horizontal inversion (Cancels vertical inversion)

V-Mirror

Vertical inversion (Cancels horizontal inversion)

HV-Mirror

Vertical and horizontal inversions

Privacy

Area Mask OFF

p: Mask number 1-8 (ALL OFF when 0)

Masking

Area Mask ON

p: Mask number 1-8 (ALL ON when 0)

Area Mask Position Clr

p: Mask number 1-8 (ALL CLEAR when 0)

*Only the "Position setting" is cleared. To make the mask display off, set the Area mask to OFF.

Area Mask Position Set

Refer to "Function Descriptions [11]Privacy Mask Setting"



Area Mask Position Center Set

Sets the mask to the center of the optical axis.



Mask Area Degree Set

p: Mask No 1-8, qrs: Pan Degree tuv: Tilt Degree



Pan/Tilt

Pan/Tilt Degree

Current positioning information settings when installing dome camera

Degree



pqr: Pan Degree, stu:Tilt Degree

(Note 9)

Auto Mask Pos. OFF

Privacy mask is set to the information of Pan/TiltDegree positioning and is not moved

Auto Mask Pos. ON

Privacy mask is set to the information of Pan/TiltDegree positioning and is moved

STILL

OFF

Sets the current image to still.

EEPROM

EEPROM Access

Writes the values to the EEPROM

Access



pqr: Address 0-2047 st: Data 0-255

Baudrate

19200 bps

9600 bps

UART communication speed settings

4800 bps

Enables after camera restart

2400 bps

*1: Only MD400

CS: Checksum

*2: Only MD300

FF: Terminator

Sanyo VCC-MD400P, VCC-MD300P, VCC-MD800P, VCC-MD600P, VCC-MD700P, VCC-MD500P 17

Communications Protocol

OFF

AGC

AGC ON/OFF

DNR ON/OFF

OFF

OFF

SMART1

SMART2

OFF

STILL

OFF

EEPROM

− 17 −