Sanyo VCC-MD400P, VCC-MD500, VCC-MD300P, VCC-MD800 Auto switch setting, ⁃⁃ When setting Sense UP

Page 24

Communications Protocol

Model: VCC-MD800/700/600/500/400/300

Note 3 Exclusive processing

Setting to auto iris mode, when SENSE UP is set

When unable to set

Cannot be set when the motion sensor is set to ON.

Cannot be set when auto pursuit is set to ON.

Auto switch setting

Sets AGC to ON.

Sets the shutter speed to normal settings.

Set to auto switch setting when set to manual iris (EI ON)

Auto switch setting

Sets the shutter speed to normal settings.

When setting SENSE UP

(*Valid with auto iris mode)

When unable to set

Cannot be set when the motion sensor is set to ON.

Cannot be set when AGC is set to OFF.

Cannot be set when auto pursuit is set to ON.

Auto switch setting

Sets the shutter speed to normal settings. Changes V-RESO UP to OFF.

When setting shutter speed to high-speed shutter mode (SHORT)

When unable to set

Cannot be set when set to auto iris and SENSE UP.

Cannot be set when set to manual iris and EI ON.

When setting the shutter speed to long exposure shutter mode (LONG)

When unable to set

Cannot be set when set to auto iris and SENSE UP.

Cannot be set when set to manual iris and EI ON. Cannot be set when the motion sensor is set to

ON.

Cannot be set when auto pursuit is set to ON.

Auto switch setting

Changes V-RESO UP to OFF.

When setting the motion setting to ON

When unable to set

Cannot be set when set to auto iris and SENSE UP.

Cannot be set when the shutter speed is set to long exposure shutter mode (LONG).

Auto switch setting

Changes auto pursuit to OFF.

When setting V-RESO UP to ON

When unable to set

Cannot be set when the shutter speed is set to long exposure shutter mode (LONG).

Cannot be set when set to auto iris and SENSE UP.

Cannot be set when set to AGC ON and DNR ON.

When setting DNR to ON (*Valid when AGC ON)

Auto switch setting

Changes V-RESO UP to OFF.

AWhen setting AGC to OFF

When unable to set

Cannot be set when D/N is set to AUTO.

Cannot be set when set to auto iris and SENSE UP.

When setting D/N to AUTO

Auto switch setting Changes AGC to ON.

When setting auto pursuit to ON

When unable to set

Cannot be set when set to auto iris and SENSE UP.

Cannot be set when the shutter speed is set to long exposure shutter mode (LONG).

Auto switch setting

Changes the motion sensor to OFF.

− 23 −

Image 24
Contents Technical Manual VVer Contents Parts Names and Dimensions DimensionsVCC-MD800/700/600/500 Series Parts Names and Dimensions VCC-MD400/MD300 SeriesInterface Board Specifications ConnectionConnection of the Interface Board and Camera Unit Input-Output Terminal Layout and Specifications External Synchronous SignalsInput-Output Terminal Descriptions FFC ComplianceCommunications Protocol Communications FormatDuring Query Command ACK During Settings CommandDuring Query Command Other than ACK Communications FlowCommand List for MD800-500 ATWMWB BLC OFF BLC onELS OFF ELS onAGC AGC ON/OFFOFF SMART1Alarm Alarm OUT OFF Alarm OUT on Line OUT OFFOSD EepromCommand List Query for MD800-500 CS FF− 13 − − 14 − Command List for MD400 − 16 − − 17 − DAY Color Burst on LevelCommand List Query for MD400 ADJ Direct BExample Motion Mask Area Settings Figure Model VCC-MD800/700/600/500/400/300⁃⁃ Status Command 2 Except for MD300 ⁃⁃ Status Command 3 Only MD400⁃⁃ Status Command 4 Only MD800/700/600/500 ⁃⁃ Status Command 5 Only MD800/700/600/500⁃ ⁃ Status Command 6 Only MD800/700/600/500 Auto switch setting ⁃⁃ When setting Sense UP⁃⁃ When setting the motion setting to on When unable to set ⁃⁃ When setting V-RESO UP to on When unable to setModel Code Communications Protocol Function Descriptions Zoom ControlZoom Position Control ⁃⁃ Direct ⁃⁃ Tele/WideFocus Control White Balance ControlIris Control Shutter Speed ControlAGC Control Backlight Compensation 10 Day/Night Switch Control ApertureMotion Detection Privacy Mask Settings Display Area Ntsc PAL Setting the Mask Angle Area Mask Degree SetDetails of the Mask Angle and Position Area Mask Degree SetSetting the Mask Position Area Mask Position Set To clarify the image when using the stabilizer StabilizerFrequency that can be stabilized Moving Distance Query Command Auto Pursuit FunctionCamera Control Command Transmission Communications ErrorApplication Software RS-232C PortSpectral Sensitivity Characteristics Specifications Ntsc systemPAL system Change history Change history