Network Camera (Wired LAN) Settings
Viewing Live Images Without Typing In a Username or Password (ID1 only)
Normally you need to type in a password at the password entry screen in order to display the live image screen. However, if you make the settings described below, you can view the live image screen without having to type in a password. In this case, you will be logged in at user level “ID1”.
1 Delete the password in the password column for ID1, and then click the [SET] button.
The following window will be displayed. Check that the ID1 password is blank, and then close the window.
2 Turn the camera off and then back on again.
A
Note:
•If the ID1 password is blank, a
•To return to normal password entry, type in a password for ID1 (example: 1111).
Changing the Access Level (ID2 or ID3)
If live images are monitored without using a password, the [SET] button will change to “CHANGE ID”. To change the access level to “ID2” or “ID3”, follow the procedure below.
1 Click the [CHANGE ID] button at the
The password entry screen will be displayed.
Note: The password entry screen can also be displayed by clicking any one of the menu select buttons.
2 Type in the user name and password for the required user level, and then click the [OK] button.
(Example: ID3, 3333)
The access level will then change to those for user level ID3 (Administrator).
– 22 – | English |