Sanyo VCC-WB4000P Saving Live Images and Alarm Images, Saving Live Images onto a Computer

Page 50

Saving Live Images and Alarm Images

Saving Live Images onto a Computer

The camera images that are being monitored can be saved as still images in the computer’s storage area in JPEG2000 format.

1 Right-click the mouse on the image to be saved.

The images will be paused and an image save pop-up menu will be displayed.

2 Click “Save JPEG2000 File As (S)...”.

The Saving JPEG2000 dialog box will be displayed.

3 Type in the file name and then click the [Save] button.

The image will be saved onto the computer.

To check the saved file, check that the JPEG2000 plug-in has been installed, and then use Internet Explorer to view the image.

Note:

•When saving images into a computer, the images will be saved at the selected resolution.

•The extension used for the saved images will be “.jp2”.

Saving Alarm Images onto a Computer as Still Images

Alarm images can be saved as still images in the computer’s storage area in JPEG2000 format.

1 Right-click the mouse on the alarm image to be saved.

The images will be paused and an image save pop-up menu will be displayed.

2 Click “Save JPEG2000 File As (S)...”.

The Saving JPEG2000 dialog box will be displayed.

3 Type in the file name and then click the [Save] button.

The image will be saved onto the computer.

To check the saved file, check that the JPEG2000 plug-in has been installed, and then use Internet Explorer to view the image.

Note:

•When saving images into a computer, the images will be saved at the selected resolution.

•The extension used for the saved images will be “.jp2”.

English

– 49 –

Image 50

Contents VCC-WB4000P Network CameraContents Precautions FeaturesAccessories Operating environment Name and Function of Each Part Monitor OUT connectorPower indicator Lens mount capName and Function of Each Part For C mount type Attaching the LensRemove the lens mount cap Attach the CS mount-type lens Flange Back Adjustment Connections Basic ConnectionsConnecting to a LAN ConnectionsWired LAN Settings p Network Camera Wired LAN SettingsInstallation of Plug-in Software to the Computer p Computer Network SET Settings pTurn on the power for the computer Network Camera Wired LAN SettingsInstallation of Plug-in Software to the Computer Click the OK buttonPlug-in software Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Language selection window Wired LAN SettingsExample Subnet mask setting Type Initial Camera Screen Image quality mode select buttonsAvailable settings Auto default setting FineAlarm indicator Wireless LAN buttonAlarm button Menu select buttonsRed indicator Lit orange alarm recording image playback is not possibleLit green alarm recording image playback is possible Grey indicatorSET button Resolution and Expansion settings default settings 640x480Selection screen example JImage display areaClick the Network menu select button Network SET SettingsSet the password Network SpeedMAC Address display Changing a passwordWhen a password has been changed Changing the Access Level ID2 or ID3 Turn the camera off and then back on againFor User access level Access Level SettingsFor Operator access level Timezone Clock SET SettingsDaylight Saving Mode Daylight SavingCamera Title Camera SettingsLive Image IrisCamera Settings Setting manual white balance ManualSetting the camera title DAY/NIGHT SettingsMode BurstSet Burst to OFF example Click the SET button Auto Mode SettingsColor Mode Settings Set Polarity to no exampleMode Settings Set AGC Gain to +12 dB example Click the SET buttonConnection example Figure Change the DAY/NIGHT setting to Color modeChange the DAY/NIGHT setting to Timer mode IR lampAlarm Settings Click the Alarm menu select buttonAlarm Settings Alarm Buffering SET Setting Set Alarm Buffering to ON, and then click the Detail button External Alarm Sensor SettingAlarm Resolution Set Alarm REC USE to USE and then click the SET buttonMotion Detector SET Settings Set the sensor marksExternal Alarm Sensor and Motion Detector Settings Alarm Output for a Specified Period Motion Detector Level Sensitivity SettingRemote Alarm Operations Set Motion Detector Level to 2 exampleContinuous Alarm Output Set Buffering Area to PRE/POST 0/10 Pre-alarm/Post-alarm RecordingAlarm detected Set Buffering Area to PRE/POST 2/8Example 1 If Priority is set to Picture Quality Recording New Alarm DataFixed Settings During Pre/Post-Alarm Recording Example 2 If Priority is set to TimeInsert the expansion memory card Alarm Data indicator green will illuminateSaving to an Expansion Memory Card Viewing Live Images Click the View Frame menu select button Viewing Live ImagesViewing the View Frame Screen Descriptions of Alarm Operation Buttons Playing Back Alarm DataPlaying Back Alarm Data in the Camera’s Internal Memory Frame RateClick the Alarm Data indicator while it is red or green Playing Back Alarm DataPlaying Back Alarm Images Stored in a Computer Playing Back Expansion Memory Card ImagesPrevious ResolutionEND Alarm Data Deleting Saving Live Images onto a Computer Saving Live Images and Alarm ImagesSaving Alarm Images onto a Computer as Still Images When the File Download pop-up menu is displayed, click Save Saving Live Images and Alarm ImagesSaving All of a Single Alarm Event onto a Computer Click the Play button and then click the Download buttonWireless LAN device settings TCP/IP settings Wireless LAN SET SettingsCamera wired LAN settings TCP/IP settings Camera wireless LAN settings TCP/IP settingsWireless LAN SET Settings Camera Wireless LAN SettingsDescription of Wireless LAN SET Screen Encipherment SettingsConnecting the camera and installing the software PPP Dial-up SettingsPPP Connection to an Internet Service Provider Double-click the Camset icon on the desktopClick the Save Info File button PPP Dial-up SettingsClick the SET to Camera button Close the Camset windowProvider TEL. no Dial to Provider SettingsAuthentication Camera Computer Dial from PC SettingPPP Connection from a Computer Telephone lineMake the settings in the PPP setting screen Set the following itemsClick the RS-232C menu select button RS-232C Settings RS-232C SETLanguage Selection Click the Language button to change the languageFirmware Version Status CheckingClick the Status menu select button SUB-MICROCOMPUTER VersionGlossary of Terms Glossary of Terms Pre-alarm and post-alarm recording If you forget the IP Address TroubleshootingIf the camera cannot be connected Specifications 136 mm 126 mm 12 mm 85 mm 59 mm 51 mm SpecificationsDimensions Printed on recycled paper 1AC6P1P2682 L5AM2/XE 0603KP-CZ