Click the [SET] button.
This completes the TIMER mode settings. Monitoring will switch from color to black & white during the set time period. At other times, monitoring will be in color.
English
Change the TIMER ON setting to “20:00” and the OFF setting to “04:00”.
4
5
Set “BURST” to “OFF” (example).
Click the [DETAIL] button in the DAY/NIGHT field and set MODE to “TIMER”.
TIMER Mode Settings
6
5
4
1,2,3
2 Set “AGC Gain” to “+12 dB” (example).
3 Set “ALARM OUT” to “NO” (example).
A signal can be output from the ALARM OUT terminal when monitoring switches to black & white. (An IR lamp can be connected so that it illuminates at such times.)
1
Example: To set monitoring to black & white between 20:00 p.m. and 4.00 a.m.
☞
CAMERA Settings
☞B/W Mode Settings
1 Click the [DETAIL] button in the DAY/NIGHT field and set MODE to “B/W”.
2
3
1,2
Set “AGC Gain” to “+12 dB” (example).
Click the [SET] button.
This completes the B/W mode settings. Monitoring will switch to black & white according to the set conditions.
– 30 –