Seagate ST373307FC, ST3146807FC Unformatted and formatted capacities, Programmable drive capacity

Page 17

Cheetah 10K.6 FC Product Manual, Rev. B

7

•Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.)

•Dithering

3.5Unformatted and formatted capacities

Formatted capacity depends on the spare reallocation sectors scheme selected, the number of data tracks per sparing zone, and the number of alternate sectors (LBAs) per sparing zone. The following table shows the standard OEM model capacity:

 

Formatted

Unformatted

ST3146807FC

11177330h (146.8) Gbytes

(190.0) Gbytes

ST373307FC

88BB998h (73.3) Gbytes

(95.0) Gbytes

ST336607FC

445DCCCh (36.7) Gbytes

(47.5) Gbytes

Standard OEM models are formatted to 512 bytes per block. You can order other capacities by requesting a dif- ferent sparing scheme and logical block size.

The sector size is selectable at format time. Users having the necessary equipment may modify the data block size before issuing a format command and obtain different formatted capacities than those listed. Cheetah 10K.6 FC drives use a zone sparing scheme. The drive is divided into frequency zones with a variable number of spares in each zone.

Note. For 2 gigabit operation, sector sizes must be divisible by 8.

3.6Programmable drive capacity

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select (6) parameter list table in the Fibre Channel Interface Manual, part number 7767496. A value of zero in the Number of Blocks field indicates that the drive will not change the capacity it is currently formatted to have. A number other than zero and less than the maximum number of LBAs in the Number of Blocks field changes the total drive capacity to the value in the Number of Blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.

3.7Factory-installed accessories

OEM standard drives are shipped with the Cheetah 10K.6 FC Installation Guide (part number 100195492).

3.8Factory-installed options

You may order the following items which are incorporated at the manufacturing facility during production or packaged before shipping. Some of the options available are (not an exhaustive list of possible options):

•Other capacities can be ordered depending on sparing scheme and sector size requested.

•Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection against transit damage. Units shipped individually require additional protection as provided by the single unit shipping pack. Users planning single unit distribution should specify this option.

•The Cheetah 10K.6 FC Installation Guide, part number 100195492, is usually included with each standard OEM drive shipped, but extra copies may be ordered.

•The Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each standard OEM drive shipped, but extra copies may be ordered.

3.9User-installed accessories

The following accessories are available. All kits may be installed in the field.

•Evaluation kit, part number 73473641.

This kit provides an adapter card (“T-card”) to allow cable connections for two FC ports and DC power.

•Single-unit shipping pack.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Page Page Page Revision Date Writer/Engineer Sheets Affected Revision status summary sheetPage Contents Installation Defect and error managementSeagate Technology support services Interface requirementsCheetah 10K.6 FC Product Manual, Rev. B Vii List of FiguresPage Cheetah 10K.6 FC family disc drive ScopeCheetah 10K.6 FC Product Manual, Rev. B Applicable standards and reference documentation Korean MIC Australian C-TickTaiwanese Bsmi Reference documentsCheetah 10K.6 FC disc drive General descriptionMedia description Standard featuresPerformance ReliabilityFactory-installed options Factory-installed accessoriesUser-installed accessories Unformatted and formatted capacitiesCheetah 10K.6 FC Product Manual, Rev. B Internal drive characteristics Performance characteristicsSeek performance characteristics Access time Format command execution time in minutesStart/stop time General performance characteristicsPrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Reliability specifications Preventive maintenance Reliability and serviceService life Service philosophyPerformance impact 7 S.M.A.R.TControlling S.M.A.R.T Reporting control MillisecondsDetermining rate Predictive failuresImplementation State of the drive prior to testingInvoking DST Short and extended testsLog page entries Product warrantyAbort ShippingAC power requirements Physical/electrical specificationsDC power requirements General DC power requirement notesConducted noise immunity Power sequencingCurrent profiles +5V +12VTypical ST373307FC drive +12V current profile Typical ST3146807FC drive +5V current profile Typical ST373307FC drive +5V current profile ST373307FC Power dissipation ST3146807FCCheetah 10K.6 FC Product Manual, Rev. B ST336607FC TemperatureEffective altitude sea level Relative humidityShock and vibration ShockPackage size Packaged/product weight Drop height Recommended mounting Acoustics Air cleanlinessCheetah 10K.6 FC Product Manual, Rev. B Vibration Mounting configuration dimensions Mechanical specificationsDrive error recovery procedures Defect and error managementDrive internal defects/errors FC-AL system errors Read retry Maximum recovery time per Write retryRead and write retry count maximum recovery times Maximum recovery time perLED connections InstallationDrive ID/option selection Drive Front 1 J6 connector requirementsDrive orientation CoolingAir flow Drive mountingGrounding Fibre Channel link service frames FC-AL featuresInterface requirements Fibre Channel task management functionsNPort login Plogi payload Bytes Fibre Channel port loginFibre Channel Process Login Accept Fibre Channel Process LoginNPort Login Accept ACC payload Bytes Process Login Plri payloadFabric Login Flogi payload Bytes Fibre Channel fabric loginAccept or NPort Login when sending frames to an initiator Fabric Login Accept ACC payload BytesDual port support Fibre Channel Arbitrated Loop optionsFC-AL options supported Option SupportedSupported commands Command code Command name Command code Supported Command name Supported commandsRead descriptor mode Cheetah 10K.6 FC Product Manual, Rev. B Cheetah 10K.6 FC Product Manual, Rev. B Inquiry data Mode Sense dataCheetah 10K.6 FC inquiry data Bytes Data hexCheetah 10K.6 FC Product Manual, Rev. B DEF DEF CHG Cheetah 10K.6 FC Product Manual, Rev. B Miscellaneous features Miscellaneous operating features and conditionsSupported Feature or condition Miscellaneous statusPhysical description Physical characteristicsPart description Positions Part number Features Connector requirementsFC-SCA pin descriptions Pin Signal name Signal typePin descriptions Fault LED Out PowerFC-AL transmitters and receivers Active LED Out11 SEL6 through SEL0 ID lines Enable port bypass signalsMotor start controls Parallel Enclosure Services Interface ESI Arbitrated loop physical address Alpa values SettingSetting Hex Dec TTL input characteristics Signal characteristicsLED driver signals Device control codesDifferential Pecl input Transmit eye diagramLink rate GHz Eye diagram data valuesAutomated Services Seagate Technology support services Online ServicesPresales Support Technical SupportEuropean Support Services Customer Service CSOUSA/Canada/Latin America Support Services Call Center Toll-free Direct dial Africa/Middle East Support ServicesAsia/Pacific Support Services Cheetah 10K.6 FC Product Manual, Rev. B Index FC-AL Cheetah 10K.6 FC Product Manual, Rev. B Plogi Cheetah 10K.6 FC Product Manual, Rev. B Cheetah 10K.6 FC Product Manual, Rev. B
Related manuals
Manual 2 pages 5.2 Kb

ST336607FC, ST373307FC, ST3146807FC specifications

The Seagate ST373307FC, ST3146807FC, and ST336607FC are robust hard disk drives designed for enterprise environments where reliability and performance are critical. Each model offers distinct features suited to various data storage needs, reflecting Seagate's commitment to innovation in storage technology.

The ST373307FC is a 73GB Fibre Channel hard drive that operates at 15,000 RPM, making it exceptionally fast for read and write operations. This drive employs a 4GB cache, enhancing its performance by allowing quicker access to frequently used data. With a 3.5-inch form factor, the ST373307FC is built for high-density environments, delivering reliable access to data. Its Fibre Channel interface supports high-speed connections, essential for data-intensive applications like databases and virtualization.

Next in line, the ST3146807FC offers a capacity of 146GB, also operating at 15,000 RPM. This drive features an 8GB cache, which significantly improves its data transfer rates, making it ideal for transactional workloads. The ST3146807FC is engineered to minimize latency and maximize throughput, ensuring that enterprises can access critical data swiftly and efficiently. Additionally, its rugged construction is designed to withstand the demands of continuous operation, providing peace of mind for businesses with strict uptime requirements.

Lastly, the ST336607FC has a substantial storage capacity of 300GB and shares the 15,000 RPM operational speed that characterizes this high-performance line. With a similar 8GB cache as the ST3146807FC, it offers excellent performance for read-intensive and write-heavy applications. The ST336607FC is also designed with enhanced thermal management features, supporting cooler operations in densely packed server environments. This model is particularly suited for applications such as data warehousing and online transaction processing, where speed and reliability are paramount.

Each of these drives utilizes advanced technologies like Native Command Queuing (NCQ), which optimizes the order of read and write requests. These features, combined with Seagate's reputation for durability and performance, make the ST373307FC, ST3146807FC, and ST336607FC excellent choices for enterprise applications requiring high-speed data access and exceptional reliability. In environments where data integrity and uptime are critical, these drives provide the robust performance necessary to meet demanding storage needs.
Top Page Image Contents