Seagate ST336607FC, ST3146807FC, ST373307FC Log page entries, Abort, Product warranty, Shipping

Page 28

18

Cheetah 10K.6 FC Product Manual, Rev. B

5.2.8.2.4Log page entries

When the drive begins DST, it creates a new entry in the Self-test Results Log page. The new entry is created by inserting a new self-test parameter block at the beginning of the self-test results log parameter section of the log page. Existing data will be moved to make room for the new parameter block. The drive reports 20 parame- ter blocks in the log page. If there are more than 20 parameter blocks, the least recent parameter block will be deleted. The new parameter block will be initialized as follows:

1.The Function Code field is set to the same value as sent in the DST command

2.The Self-Test Results Value field is set to Fh

3.The drive will store the log page to non-volatile memory

After a self-test is complete or has been aborted, the drive updates the Self-Test Results Value field in its Self- Test Results Log page in non-volatile memory. The host may use Log Sense to read the results from up to the last 20 self-tests performed by the drive. The self-test results value is a 4-bit field that reports the results of the test. If the field is zero, the drive passed with no errors detected by the DST. If the field is not zero, the test failed for the reason reported in the field.

The drive will report the failure condition and LBA (if applicable) in the Self-test Results Log parameter. The Sense key, ASC, ASCQ, and FRU are used to report the failure condition.

5.2.8.2.5Abort

There are several ways to abort a diagnostic. You can use a SCSI Bus Reset or a Bus Device Reset message to abort the diagnostic.

You can abort a DST executing in background mode by using the abort code in the DST Function Code field. This will cause a 01 (self-test aborted by the application client) code to appear in the self-test results values log. All other abort mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition).

5.2.9Product warranty

Beginning on the date of shipment to the customer and continuing for a period of five years, Seagate warrants that each product (including components and subassemblies) that fails to function properly under normal use due to defect in materials or workmanship or due to nonconformance to the applicable specifications will be repaired or replaced, at Seagate’s option and at no charge to the customer, if returned by customer at cus- tomer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. Seagate will pay for transporting the repair or replacement item to the customer. For more detailed warranty information, refer to the standard terms and conditions of purchase for Seagate products. Refer to Section 10 for contact information.

Shipping

When transporting or shipping a drive, use only a Seagate-approved container. Keep your original box. Seagate approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids the drive warranty.

Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in tran- sit. Contact your authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier experienced in handling computer equipment.

Product repair and return information

Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page Page Page Page Revision status summary sheet Revision Date Writer/Engineer Sheets AffectedPage Contents Defect and error management InstallationSeagate Technology support services Interface requirementsList of Figures Cheetah 10K.6 FC Product Manual, Rev. B ViiPage Scope Cheetah 10K.6 FC family disc driveCheetah 10K.6 FC Product Manual, Rev. B Applicable standards and reference documentation Australian C-Tick Korean MICTaiwanese Bsmi Reference documentsGeneral description Cheetah 10K.6 FC disc driveStandard features Media descriptionPerformance ReliabilityFactory-installed accessories Factory-installed optionsUser-installed accessories Unformatted and formatted capacitiesCheetah 10K.6 FC Product Manual, Rev. B Performance characteristics Internal drive characteristicsSeek performance characteristics Access time Format command execution time in minutesGeneral performance characteristics Start/stop timePrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Reliability specifications Reliability and service Preventive maintenanceService life Service philosophy Controlling S.M.A.R.T 7 S.M.A.R.T Performance impact Milliseconds Reporting controlDetermining rate Predictive failuresState of the drive prior to testing ImplementationInvoking DST Short and extended testsProduct warranty Log page entriesAbort ShippingPhysical/electrical specifications AC power requirementsDC power requirements General DC power requirement notesPower sequencing Conducted noise immunityCurrent profiles +5V +12VTypical ST373307FC drive +12V current profile Typical ST3146807FC drive +5V current profile Typical ST373307FC drive +5V current profile Power dissipation ST3146807FC ST373307FCTemperature Cheetah 10K.6 FC Product Manual, Rev. B ST336607FCRelative humidity Effective altitude sea levelShock and vibration ShockPackage size Packaged/product weight Drop height Recommended mounting Cheetah 10K.6 FC Product Manual, Rev. B Vibration Air cleanlinessAcoustics Mechanical specifications Mounting configuration dimensionsDrive internal defects/errors Defect and error managementDrive error recovery procedures Read retry Maximum recovery time per Write retry FC-AL system errorsRead and write retry count maximum recovery times Maximum recovery time perDrive ID/option selection InstallationLED connections 1 J6 connector requirements Drive FrontDrive orientation CoolingDrive mounting Air flowGrounding FC-AL features Fibre Channel link service framesInterface requirements Fibre Channel task management functionsFibre Channel port login NPort login Plogi payload BytesFibre Channel Process Login Fibre Channel Process Login AcceptNPort Login Accept ACC payload Bytes Process Login Plri payloadFibre Channel fabric login Fabric Login Flogi payload BytesFabric Login Accept ACC payload Bytes Accept or NPort Login when sending frames to an initiatorFibre Channel Arbitrated Loop options Dual port supportFC-AL options supported Option SupportedSupported commands Command code Command name Supported commands Command code Supported Command nameRead descriptor mode Cheetah 10K.6 FC Product Manual, Rev. B Mode Sense data Cheetah 10K.6 FC Product Manual, Rev. B Inquiry dataCheetah 10K.6 FC inquiry data Bytes Data hexCheetah 10K.6 FC Product Manual, Rev. B DEF DEF CHG Cheetah 10K.6 FC Product Manual, Rev. B Miscellaneous operating features and conditions Miscellaneous featuresSupported Feature or condition Miscellaneous statusPhysical characteristics Physical descriptionConnector requirements Part description Positions Part number FeaturesPin descriptions Pin Signal name Signal typeFC-SCA pin descriptions Power Fault LED OutFC-AL transmitters and receivers Active LED OutMotor start controls Enable port bypass signals11 SEL6 through SEL0 ID lines Parallel Enclosure Services Interface ESI Setting Hex Dec SettingArbitrated loop physical address Alpa values Signal characteristics TTL input characteristicsLED driver signals Device control codesTransmit eye diagram Differential Pecl inputEye diagram data values Link rate GHzSeagate Technology support services Online Services Automated ServicesPresales Support Technical SupportUSA/Canada/Latin America Support Services Customer Service CSOEuropean Support Services Asia/Pacific Support Services Africa/Middle East Support ServicesCall Center Toll-free Direct dial Cheetah 10K.6 FC Product Manual, Rev. B Index FC-AL Cheetah 10K.6 FC Product Manual, Rev. B Plogi Cheetah 10K.6 FC Product Manual, Rev. B Cheetah 10K.6 FC Product Manual, Rev. B
Related manuals
Manual 2 pages 5.2 Kb
Top Page Image Contents