Seagate ST336607FC, ST3146807FC, ST373307FC manual Package size Packaged/product weight Drop height

Page 37

Cheetah 10K.6 FC Product Manual, Rev. B

27

b.Operating—abnormal

Equipment, as installed for normal operation, does not incur physical damage while subjected to intermit- tent shock not exceeding 40 Gs at a maximum duration of 11 msec (half sinewave). Shock occurring at abnormal levels may promote degraded operational performance during the abnormal shock period. Speci- fied operational performance will continue when normal operating shock levels resume. Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than two times per second.

c.Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive subjected to nonrepetitive shock not exceeding 75 Gs at a maximum duration of 11 msec (half sinewave) shall not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis.

The drive subjected to nonrepetitive shock not exceeding 225 Gs at a maximum duration of 2 msec (half sinewave) does not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis.

The drive subjected to nonrepetitive shock not exceeding 120 Gs at a maximum duration of 0.5 msec (half sinewave) does not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis.

d.Packaged

Disc drives shipped as loose load (not palletized) general freight will be packaged to withstand drops from heights as defined in the table below. For additional details refer to Seagate specifications 30190-001 (under 100 lbs/45 kg) or 30191-001 (over 100 lbs/45 Kg).

Package size

Packaged/product weight

Drop height

<600 cu in (<9,800 cu cm)

Any

60 in (1524 mm)

600-1800 cu in (9,800-19,700 cu cm)

0-20 lb (0 to 9.1 kg)

48 in (1219 mm)

>1800 cu in (>19,700 cu cm)

0-20 lb (0 to 9.1 kg)

42 in (1067 mm)

>600 cu in (>9,800 cu cm)

20-40 lb (9.1 to 18.1 kg)

36 in (914 mm)

Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general freight shipment shall withstand a drop test from 48 inches (1,070 mm) against a concrete floor or equivalent.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Page Page Page Revision Date Writer/Engineer Sheets Affected Revision status summary sheetPage Contents Installation Defect and error managementSeagate Technology support services Interface requirementsCheetah 10K.6 FC Product Manual, Rev. B Vii List of FiguresPage Cheetah 10K.6 FC family disc drive ScopeCheetah 10K.6 FC Product Manual, Rev. B Applicable standards and reference documentation Korean MIC Australian C-TickTaiwanese Bsmi Reference documentsCheetah 10K.6 FC disc drive General descriptionMedia description Standard featuresPerformance ReliabilityFactory-installed options Factory-installed accessoriesUser-installed accessories Unformatted and formatted capacitiesCheetah 10K.6 FC Product Manual, Rev. B Internal drive characteristics Performance characteristicsSeek performance characteristics Access time Format command execution time in minutesStart/stop time General performance characteristicsPrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Reliability specifications Preventive maintenance Reliability and serviceService life Service philosophyControlling S.M.A.R.T 7 S.M.A.R.TPerformance impact Reporting control MillisecondsDetermining rate Predictive failuresImplementation State of the drive prior to testingInvoking DST Short and extended testsLog page entries Product warrantyAbort ShippingAC power requirements Physical/electrical specificationsDC power requirements General DC power requirement notesConducted noise immunity Power sequencingCurrent profiles +5V +12VTypical ST373307FC drive +12V current profile Typical ST3146807FC drive +5V current profile Typical ST373307FC drive +5V current profile ST373307FC Power dissipation ST3146807FCCheetah 10K.6 FC Product Manual, Rev. B ST336607FC TemperatureEffective altitude sea level Relative humidityShock and vibration ShockPackage size Packaged/product weight Drop height Recommended mounting Cheetah 10K.6 FC Product Manual, Rev. B Vibration Air cleanlinessAcoustics Mounting configuration dimensions Mechanical specificationsDrive internal defects/errors Defect and error managementDrive error recovery procedures FC-AL system errors Read retry Maximum recovery time per Write retryRead and write retry count maximum recovery times Maximum recovery time perDrive ID/option selection InstallationLED connections Drive Front 1 J6 connector requirementsDrive orientation CoolingAir flow Drive mountingGrounding Fibre Channel link service frames FC-AL featuresInterface requirements Fibre Channel task management functionsNPort login Plogi payload Bytes Fibre Channel port loginFibre Channel Process Login Accept Fibre Channel Process LoginNPort Login Accept ACC payload Bytes Process Login Plri payloadFabric Login Flogi payload Bytes Fibre Channel fabric loginAccept or NPort Login when sending frames to an initiator Fabric Login Accept ACC payload BytesDual port support Fibre Channel Arbitrated Loop optionsFC-AL options supported Option SupportedSupported commands Command code Command name Command code Supported Command name Supported commandsRead descriptor mode Cheetah 10K.6 FC Product Manual, Rev. B Cheetah 10K.6 FC Product Manual, Rev. B Inquiry data Mode Sense dataCheetah 10K.6 FC inquiry data Bytes Data hexCheetah 10K.6 FC Product Manual, Rev. B DEF DEF CHG Cheetah 10K.6 FC Product Manual, Rev. B Miscellaneous features Miscellaneous operating features and conditionsSupported Feature or condition Miscellaneous statusPhysical description Physical characteristicsPart description Positions Part number Features Connector requirementsPin descriptions Pin Signal name Signal typeFC-SCA pin descriptions Fault LED Out PowerFC-AL transmitters and receivers Active LED OutMotor start controls Enable port bypass signals11 SEL6 through SEL0 ID lines Parallel Enclosure Services Interface ESI Setting Hex Dec SettingArbitrated loop physical address Alpa values TTL input characteristics Signal characteristicsLED driver signals Device control codesDifferential Pecl input Transmit eye diagramLink rate GHz Eye diagram data valuesAutomated Services Seagate Technology support services Online ServicesPresales Support Technical SupportUSA/Canada/Latin America Support Services Customer Service CSOEuropean Support Services Asia/Pacific Support Services Africa/Middle East Support ServicesCall Center Toll-free Direct dial Cheetah 10K.6 FC Product Manual, Rev. B Index FC-AL Cheetah 10K.6 FC Product Manual, Rev. B Plogi Cheetah 10K.6 FC Product Manual, Rev. B Cheetah 10K.6 FC Product Manual, Rev. B
Related manuals
Manual 2 pages 5.2 Kb

ST336607FC, ST373307FC, ST3146807FC specifications

The Seagate ST373307FC, ST3146807FC, and ST336607FC are robust hard disk drives designed for enterprise environments where reliability and performance are critical. Each model offers distinct features suited to various data storage needs, reflecting Seagate's commitment to innovation in storage technology.

The ST373307FC is a 73GB Fibre Channel hard drive that operates at 15,000 RPM, making it exceptionally fast for read and write operations. This drive employs a 4GB cache, enhancing its performance by allowing quicker access to frequently used data. With a 3.5-inch form factor, the ST373307FC is built for high-density environments, delivering reliable access to data. Its Fibre Channel interface supports high-speed connections, essential for data-intensive applications like databases and virtualization.

Next in line, the ST3146807FC offers a capacity of 146GB, also operating at 15,000 RPM. This drive features an 8GB cache, which significantly improves its data transfer rates, making it ideal for transactional workloads. The ST3146807FC is engineered to minimize latency and maximize throughput, ensuring that enterprises can access critical data swiftly and efficiently. Additionally, its rugged construction is designed to withstand the demands of continuous operation, providing peace of mind for businesses with strict uptime requirements.

Lastly, the ST336607FC has a substantial storage capacity of 300GB and shares the 15,000 RPM operational speed that characterizes this high-performance line. With a similar 8GB cache as the ST3146807FC, it offers excellent performance for read-intensive and write-heavy applications. The ST336607FC is also designed with enhanced thermal management features, supporting cooler operations in densely packed server environments. This model is particularly suited for applications such as data warehousing and online transaction processing, where speed and reliability are paramount.

Each of these drives utilizes advanced technologies like Native Command Queuing (NCQ), which optimizes the order of read and write requests. These features, combined with Seagate's reputation for durability and performance, make the ST373307FC, ST3146807FC, and ST336607FC excellent choices for enterprise applications requiring high-speed data access and exceptional reliability. In environments where data integrity and uptime are critical, these drives provide the robust performance necessary to meet demanding storage needs.
Top Page Image Contents