Tamron LS6 quick start Display the version of firmware currently

KEYBOARD

Press the shift key						twice to access the functions listed in the table
below.
		PRESS		THEN			RESULT
	SHIFT FIRST			PRESS
							Display the version of firmware currently
							installed on the printer.
							Delete all items on the entire label. Does
							not delete current formats.
							Activate or deactivate fit checking. Fit
							checking automatically checks the size of
							the label items to determine if they will fit on
							the label. Fit checking occurs after each
							new item is entered onto the home screen.
							If fit checking if deactivated, the printer will
							only perform fit checking before printing.
							Reverse feeds the label media.
					Any		Enter lower case character if caps lock is
			Alphabetic				on. Enter upper case character if caps lock
					Key		is off.
							Activate or deactivate caps lock.
							Move cursor to home position on the home
							screen.
							Move cursor to end position on the home
							screen.
							Move cursor to far right position of current
							line on the home screen.
							Move cursor to far left position of current
							line on the home screen.
							Automatically read the label mandrel in
							order to restore default formats for a new
							label roll or to enter an exact label length for
							continuous tape.
							Print a selection of pages from the label.
Press the shift key							three times in a row to exit the shift mode.

19