Tamron LS6 quick start Using File Manager

USING FILE MANAGER

The VIPER™ LS6 has the ability to store and recall label files and data lists. Label files and data lists are stored and recalled within File Manager. Label files are designated with a .LS6 ending. Data lists are designated with a

.DAT ending.

To access File Manager, enter the setup menu and:

1.Use the up or down directional arrows to highlight File.

2.Press the right directional arrow key to enter File Manager.

3.Use the up or down directional arrow keys to highlight Filename.

4.Use the right or left directional arrow keys to select the desired file. There are 20 file storage locations in the VIPER™ LS6.

NOTE:	When saving a new file, press the	key to begin entering
	a file name. Use the alphabetic or numeric keys to enter a
	file name. After entering a file name, press the			key
	again to Save.
NOTE:	When renaming a previously saved file, press the		key to

begin entering the new file name. Use the alphabetic or numeric keys to enter the new file name. After entering the

name, press the key again to Save. The printer will then prompt to Overwrite File? 1-Yes2-No. Press 1 to accept the new file name or press 2 to keep the previous file name.

5.Use the up or down directional arrow keys to highlight Action.

6.Use the right or left directional arrow keys to select Save, Load, Delete, or Delete All.

WARNING: Selecting Delete All will erase all stored label and data files.

7.Press the key to complete the selected action.

8.Press the key to return to the setup menu.

9.Press the key again to return to the home screen.

NOTE:	When recalling a previously stored label file, the part number
	of the stored label file must match the part number of the
	label roll installed in the printer. If the part numbers do not
	match, an error message will display on the screen.

48