Sekonic L-758DR manual Setting measuring mode, Lux, Fc

4. Basic Operation

2.Setting measuring mode

1.Hold down the Mode button ⑩ and turn the Jog wheel ⑤ to select the desired mode. The mode switching sequence is shown in the chart below:

Shutter Speed Priority mode (Available light)

See page 15

Aperture Priority mode (Available light)

See page 17

EV mode (Available light)

See page 18

LUX, FC

FL, cd/m2

See page 34,35

Auto Reset Cordless Flash mode

See page 22

Cordless Multiple Flash (Cumulative) mode

See page 25

→CINE only

Wireless Multiple Flash Radio Triggering mode

See page 28

Wireless Flash Radio Triggering mode

See page 28

Wireless Flash channel Setting mode

See page 28

Cord Multiple Flash (Cumulative) mode

See page 24

Cord Flash mode

See page 21

with Radio transmitter module

with Radio transmitter module

with Radio transmitter module

2.Modes enclosed in dotted lines (See page 40)

can only be selected with custom setting.

3. Modes enclosed in		lines can only be selected with L-758DR. For L-758D and L-758CINE,
they can be selected	when	Optional Radio Transmitter Module is installed. (See page 28)

4.In addition to exposure reading, L-758CINE displays FC or LUX in incident light mode, and FL or cd/m2 in reflected light mode.(See page 34)

Reference:

•Available light is continuous light like natural light (sunlight) or tungsten lamps and florescent lamps like pulsing light sources.

•Flash light is a brief, intense burst of light made by such as electronic flash units or flash bulbs.

-12-