Sekonic L-758DR manual Filter compensation

Page 44

6. Advanced Functions

8.Filter compensation

8-1 Filter compensation (1)

It is possible to compensate for filter factor within a range of ± 5.0 EV in 1/10 steps. The measurement corresponding to the set compensation and can be displayed while pressing ISO2 button ⑥ . Highlight and shadow compensation values can also be enter for quick exposure metering.

1.Select setting number 1 and item number 1 in the custom setting mode (see page 40).

2.Set the desired compensation by turning the Jog wheel ⑤ while pressing ISO2 button.

•In case of filter compensation

When attaching the filter with 1.0 step exposure factor to the camera, set “1.0” in ISO2 indicator by rotating Jog wheel while pressing ISO2 button.

•In case of highlight measurement compensation

When compensating plus 2 steps from highlight measurement, set “2.0” in ISO2 indicator by rotating Jog wheel while pressing ISO2 button.

-38-

Image 44

Contents Digitalmaster Blank Safety Precautions Table of Contents Optional Accessories Technical Data Care and Maintenance FCC & IC compliance information Parts Designation Light Meter Parts758DR 758D/L-758CINESupplied Accessories Page Page Explanation of the Liquid Crystal Display Explanation of the Liquid Crystal Display Before Using Inserting the batteryChecking battery capacity Attach the strapSetting ISO 2 sensitivity Auto Power Off functionSetting ISO 1 sensitivity Jog Wheel Lock or Lock Off Incident Basic Operation Incident or reflected spot measuringSetting measuring mode LUX, FCIncident Measurement Mode Reflected Measurement Mode spot metering Measuring ambient light Shutter Speed Priority modeMeasurement Measurement Aperture Priority mode EV mode Cinematography Measurement. Release the Measuring button to Cord Flash mode Measuring electronic flashAuto-reset cordless flash mode Percentage Cord multiple flash cumulative mode Cordless multiple flash cumulative mode Measurement Flash analyzing function Wireless Flash Radio Triggering Abcd RT-32FCC Advanced Functions Memory functionAveraging function Contrast functionMemory button Indicator of reading Set shutter speed 160000 230000 EV value → Foot-lambert FL conversion table How to use the Exposure compensation function How to use Calibration compensation function Filter compensation Filter factor number compensation 2 L-758CINE only Filters, LCD Display and Corrected ValueCustom setting function Custom setting no Calibration testing for exposure profiling Camera Exposure ProfilingCamera Exposure Profiling Outline of software Input test target dataSekonic Application Software Manual Exposure Profile Input Camera Exposure Profiling Camera Exposure Profiling EV scale Analog scaleAperture scale Points will be displayed as fast blinking Icons 3 MID.TONE buttonCamera Exposure Profiling Camera Exposure Profiling Optional Accessories Synchro cord18% Gray Card Lens Hood/Step-Up Ring 30.5mm → 40.5mmRT-32CE Technical Data FCC & IC Maintenance Notes Care and MaintainanceFCC & IC compliance information FCC IDPage Memo Memo Blank TEL +810 3-3978-2335 FAX+8103-3978-5229