Sekonic L-758DR manual RT-32CE

Page 59

8. Optional Accessories

Wireless Flash Radio Triggering module (For the L-758D or L-758CINE. )

Electronic flash units and/or cameras can de triggered wireless from the L-758 or L-758CINE with optional radio module using PocktWizard Receiver or Trans ceivers connected to them.

Radio transmitter module (32 channels)

RT-32FCC

RT-32CE

(for US or Canada)

(for EU countries)

Radio frequency

 

FCC & IC (indicating “Use RT-32FCC for radio transmitter module” on the back of body) CH1 ~ 16 : 344.0MHz CH17 ~ 32 : 346.5 ~ 354.0MHz

CE (indicating “CE” on the back of body)

CH1 ~ 16 : 433.62MHz CH17 ~ 32 : 434.22MHz

Reference:

RT-32FCC/CE transmitter module, old Sekonic RR-4 and RR-32 receivers are compatible with PocketWizard® products from LPA Design (www.pocketwizard.com), Profoto® products (www.profoto.com) and other manufacturers with same system.

NOTE:

Before purchasing PocketWizard wireless (radio frequency) your light meter’s is compatible equipment, be sure that it is correct radio frequency for the country that will be used in and is the same radio frequency as the light meter.

PocketWizard and Sekonic’s Radio Triggering system may be used only in countries where a permit for the approved frequency has been issued by the government office in charge. There are several kinds of approved frequencies in the world, and we recommend you to be sure that check your Sekonic light meter Transmitter and Receiver(s) or Transceiver

(s) are compatible with each other.

-53-

Image 59
Contents Digitalmaster Blank Safety Precautions Table of Contents Optional Accessories Technical Data Care and Maintenance FCC & IC compliance information 758D/L-758CINE Parts DesignationLight Meter Parts 758DRSupplied Accessories Page Page Explanation of the Liquid Crystal Display Explanation of the Liquid Crystal Display Attach the strap Before UsingInserting the battery Checking battery capacitySetting ISO 2 sensitivity Auto Power Off functionSetting ISO 1 sensitivity Jog Wheel Lock or Lock Off Incident Incident or reflected spot measuring Basic OperationLUX, FC Setting measuring modeIncident Measurement Mode Reflected Measurement Mode spot metering Measuring ambient light Shutter Speed Priority modeMeasurement Measurement Aperture Priority mode EV mode Cinematography Measurement. Release the Measuring button to Measuring electronic flash Cord Flash modeAuto-reset cordless flash mode Percentage Cord multiple flash cumulative mode Cordless multiple flash cumulative mode Measurement Flash analyzing function Wireless Flash Radio Triggering Abcd RT-32FCC Memory function Advanced FunctionsContrast function Averaging functionMemory button Indicator of reading Set shutter speed 160000 230000 EV value → Foot-lambert FL conversion table How to use the Exposure compensation function How to use Calibration compensation function Filter compensation Filters, LCD Display and Corrected Value Filter factor number compensation 2 L-758CINE onlyCustom setting function Custom setting no Camera Exposure Profiling Calibration testing for exposure profilingCamera Exposure Profiling Outline of software Input test target dataSekonic Application Software Manual Exposure Profile Input Camera Exposure Profiling Camera Exposure Profiling EV scale Analog scaleAperture scale 3 MID.TONE button Points will be displayed as fast blinking Icons Camera Exposure Profiling Camera Exposure Profiling Lens Hood/Step-Up Ring 30.5mm → 40.5mm Optional AccessoriesSynchro cord 18% Gray CardRT-32CE Technical Data FCC & IC Care and Maintainance Maintenance NotesFCC ID FCC & IC compliance informationPage Memo Memo Blank TEL +810 3-3978-2335 FAX+8103-3978-5229