Sekonic L-758DR manual Manual Exposure Profile Input

7. Camera Exposure Profiling

2-2 Manual Exposure Profile Input

It situations where it is not possible or convenient to use a computer or the Sekonic Data Transfer Software, Exposure Profile data can be entered into the L-758DR (L-758D or L-758CINE) directly. Below is the step by step process for manually entering a specific Exposure Profile.

1) With the meter turned off,enter the Camera Expo- sure Profile mode by pressing the Power button ⑫ while pressing the AVE../ ⊿ EV button ④ at the same time..

2)In the Camera Exposure Profiling mode, the cur- rent (or preset) contents are displayed.

3)Setting Individual Exposure Profiles (Camera 1, 2 and 3)

Press MID.TONE button ⑳ while pressing ISO1 button ⑪ to select the desired camera exposure profile.

4) Setting measuring mode

Rotate the Jog wheel ⑤ while pressing the Mode button ⑩ to select measuring mode (ambient or flash including all flash mode)

5) Setting light receiving method

Turn the Incident/reflected spot selector dial ⑲ to select incident or reflected light.

6) Setting ISO sensitivity

Rotate the Jog wheel ⑤ while pressing the ISO1 button ⑪ to select ISO sensitivity.

-45-