Sekonic L-758DR manual Custom setting no

6. Advanced Functions

1.To enter the custom setting mode, the meter must first be turned off. Press Mode button ⑩ and turn the power on.

2.In the custom setting mode, ‘CS’ (custom setting) is displayed in the ISO display area, a setting number between 01-14 (L-758DR/758D) or 01-17 (L-

758CINE) is displayed in the shutter speed display area and item number 0, 1, 2 or 3 is displayed in the aperture display area.

Custom setting no.

3.Turn the Jog wheel ⑤ and select the desired setting

number and the custom setting name (see page 40).

Custom setting item no.

4.The item number will change each time the Mode button is pressed.

5.Pressing the Memory clear button @3in the custom setting mode will reset all settings to default.

6.After completing the custom setting, terminate the custom setting mode by turning the power off. This operation will also automatically turn off the power.

-41-