7. Camera Exposure Profiling
2) The EV scale displays Clipping 
"icon.
3) Measured value exceeding Dynamic range will |
|
|
|
|
|
|
Clipping |
|
| Clipping point(+) | |||
be displayed as a slow blinking " " | Dynamic | Dynamic range(+) | ||||
icons.Measurements that exceed the clipping |
| Mid.Tone | ||||
points will be displayed as fast blinking " " |
|
|
|
|
|
|
icons. |
|
|
|
|
|
|
Exceed dynamic | Exceed clipping |
range(blinking slowly) | point (blinking faster) |
Mid. Tone (blinking)
Reference:
•In the custom setting mode (see page 40), it is possible to select how to indicate the clipping points and the dynamic range. Below are the three display choices.
Five point | Inside Range | Outside Range |
3-2-3 MID.TONE button
This button is used to set the measured value in the center of EV scale.
1) Take a measurement by pressing the Measur- ing button ⑭ . Press MID.TONE button ⑳ to set the Mid.Tone on the scale. ” 
” in the center of the EV scale will blink continuously twice to indicate that the Mid.Tone has been set.