Section
03
Connecting the System
Connecting the power cord (1)
Yellow
To terminal always supplied with power regardless of ignition switch position.
Red
To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
Orange/White
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note
When a subwoofer is connected to this navigation system instead of a rear speaker, change the rear output setting in the Initial Setting. (Refer to “Operation Manual”.) The subwoofer output of this navigation system is monaural.
|
| White |
Front speaker |
| |
| ||
|
| |
|
| White/Black |
Left |
| Green |
|
| |
Rear speaker or |
| |
|
|
With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
Gray
Front speaker
Gray/Black
Right
Violet
Rear speaker or
Subwoofer (4 Ω) | |
| |
| Green/Black |
Violet/Black
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with violet and violet/black leads of this navigation system. Do not connect anything with green and green/black leads.
GreenViolet
Not used.
Green/Black Violet/Black
Subwoofer (4 Ω) 2
10
En