Section
04
Installation
When installing the antenna inside the vehicle (on the rear shelf)
Affix the metal sheet on as level a surface as possible where the GPS antenna faces the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened with its magnet.)
GPS antenna
Metal Sheet
Peel off the protective sheet on the rear.
Make sure the surface is free of moisture, dust, grime, oil, etc., before affixing the metal sheet.
Note
The metal sheet contains a strong adhesive which may leave a mark on the surface if it is removed.
Clamps
Use clamps to secure the lead where necessary inside the vehicle.
Notes
!When attaching the metal sheet, do not cut it into small pieces.
!Some models use window glass that does not allow signals from GPS satellites to pass through. On such models, install the GPS antenna on the outside of the vehicle.
24
En