Section
04
Installation
Parts supplied
The navigation unit | Binding screw |
| (5 mm × 6 mm) |
| (8 pcs.) |
Flush surface screw
(5 mm × 6 mm)
(8 pcs.)
Installation using the screw holes on the side of the navigation unit
%Fastening the navigation unit to the factory
Position the navigation unit so that the brack- ets screw holes and its screw holes are aligned (are fitted), and tighten the screws at 3 or 4 locations on each side.
Use either the binding screws (5 mm × 6 mm) or flush surface screws (5 mm × 6 mm), de- pending on the shape of the bracket’s screw holes.
If the pawl gets in the way, bend it down
Factory radio mounting bracket
Binding screw or flush surface screw
Be sure to use the screws supplied with this navigation
system.
Dashboard or console
22
En