Section
05 
After Installation
After Installing this
Navigation System
1 Reconnecting the battery.
First,
2Start the engine.
3Press RESET button.
Press RESET button on the navigation unit using a pointed object such as the tip of a pen.
4 Make the following settings:
=For details concerning operations, refer to “Operation Manual”.
1Set the language.
2Drive an unobstructed road until the GPS starts receiving the signal normally.
3Make some necessary adjustments.
!Setting the time
!Setting the units and the date format, etc.
!Change other settings as you prefer
Note
After installing this navigation system, be sure to check at a safe place that the vehicle is perform- ing normally. 
28
En