Connecting the System
—Change the source from radio (AM or FM) to another source.
—Turn the source off
—Turn off the ignition switch (ACC OFF)
!If [Ant CTRL] mode is set to [Power], the vehicle’s antenna can be stowed or turned off only when the ignition switch is turned off (ACC OFF).
!Do not connect this lead to the system con- trol terminal of external power amps.
!Be sure not to use this lead as the power supply lead for the
Notice for the blue/white lead
!When the ignition switch is turned on (ACC ON), a control signal is output through the blue/white lead. Connect to an external power amp’s system remote control term- inal (max. 300 mA 12 V DC). The control sig- nal is output through the blue/white lead, even if the audio source is switched off.
!Do not connect this lead to the
!Be sure not to use this lead as the power supply lead for the external power amps.
Such connection could cause excessive current drain and malfunction.
|
| Section |
|
| 03 |
|
| English |
Parts supplied | ||
Parts marked (*) are not supplied with AVIC- |
| |
F700BT and |
|
The navigation unit | Power cord |
Connector* | Extension lead |
| (for reverse signal) |
Extension lead* | GPS antenna |
(for speed signal) |
|
RCA connector | Microphone |
En | 7 |