IF THE SCANNER IS INSIDE THE CHAIN…
TURN OFF THE COMPUTER AND ALL THE SCSI DEVICES
BEFORE CHANGING SCSI IDS, CONNECTING SCSI
CABLES, OR DISCONNECTING SCSI CABLES.
One
The following is an example of one possible SCSI chain configuration.
Computer |
|
SCSI Device 1 | SCSI Device 2 |
| Scanner |
Cable “A” | Cable “B” |
1.Connect one end of the SCSI cable A into either SCSI port on the back of the scanner.
• Either SCSI port can be used, there is no dedicated in or out port.
2.Plug the other end of SCSI cable A into SCSI device 1.
11 Continued on following page.