Konica Minolta II manual Back

Page 9

BACK

SCSI ID switch

Centronics

AC socket

Terminator dip switch

 

D-sub-25 port

 

 

 

IMPORTANT: LOCKING PIN INFORMATION

UNLOCK THE OPTICS BEFORE

USING THE SCANNER FOR THE

FIRST TIME.

The optics inside the scanner have been parked and locked before shipment for their protection.

Before using the scanner for the first time, unlock the locking pin.

• Gently turn the scanner up-side down. Using a flat-head screwdriver, turn the locking pin counter- clockwise until it pops up.

7

Image 9
Contents Hardware Manual USA For Proper and Safe USE Table of Contents Indicator Lamp Technical Details Customer Service Before YOU Begin Package ContentsMacintosh System RequirementsFront Names of PartsBack IBM PC/AT Setting the Scsi IDConnecting to the Computer Connecting to the Computer Plug the other end of Scsi cable a into Scsi device Plug the power cord into the scanner’s AC socket Plug the other end of the power cord into a grounded outlet Getting Started Film EmulsionHandling Care Slide Mount Holder SH-M1 Loading 35MM Film Holders35MM Film Holder FH-M1 Press the cover firmly closed until it clicks Using the Medium Format Holder MH-M1 Loading the Medium Format Holder MH-M1Medium Format and TEM Film Place the film in the film holder 16mm and APS Sleeve Film Place the film in the mask using the film guides Rotating the Frame Ejecting Inserting the Holder Into the ScannerAPS Adapter Names of Parts APS Adapter AD-100 Sold SeparatelyLoading the Cassette Inserting the Adapter Remove the adapter Ejecting the AdapterChanging the Fluorescent Lamp Connect the new lamp Important Before Transporting the Scanner Symptom Cause/Action Reference TroubleshootingSettings Control Panel Display Indicator Lamp Scanner Status Indicator LampAPS Technical DetailsTo determine the version number of your driver software Customer ServiceFIN
Related manuals
Manual 7 pages 3.84 Kb